881 and 881CT Cam Track Hydraulic Benders
881 and 881CT Cam Track® Hydraulic Benders - CableOrganizer.com
881 and 881CT Cam Track® Hydraulic Benders - CableOrganizer.com
- No tags were found...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Assembly <strong>and</strong> Operation Instructions<strong>881</strong> <strong>and</strong> <strong>881</strong>CT with 1813 Bending Table (cont’d)<strong>881</strong> <strong>and</strong> <strong>881</strong>CT <strong>Cam</strong> <strong>Track</strong> ® <strong>Hydraulic</strong> <strong>Benders</strong>15"9. Attach the second leg support unit (23) to the10-foot conduits. Tighten the four screws (24).7. Position the bender mounting unit 15" from theleg support unit. Tighten the two bender mountingunit screws (28).5"12"PIPE CLAMPPUMP SUPPORTUNIT10. Hang the two pipe clamps (34) over each of the10-foot conduits. Set the pipe clamps 5" <strong>and</strong> 12"from the bender mounting unit. Mount the pumpsupports (26) onto the clamps. Do not tightenthe clamps.8. Slide the pipe vise unit (38) onto the two 10-footconduits, as shown.
Change language