881 and 881CT Cam Track Hydraulic Benders

More documents

Recommendations

Info

Assembly and Operation Instructions881 and 881CT with 1813 Bending Table (cont’d)881 and 881CT Cam Track ® Hydraulic Benders47. 90° of bend.50. Push the follow bar back to the start position.48. Remove the 1805 Bending Degree Indicator.51. Remove the saddle pin and saddle.49. Rotate the pump control lever clockwise to retractthe shoe.52. Release the vise chain.
Assembly and Operation Instructions881 and 881CT with 1813 Bending Table (cont’d)881 and 881CT Cam Track ® Hydraulic Benders53. Remove the conduit from the bender.58. To change the follow bar, twist and remove.54 and 55. The 90° bend is complete.
Page 1 and 2: INSTRUCTION MANUAL881 and 881CT Cam
Page 3 and 4: 881 and 881CT Cam Track ® Hydrauli
Page 5 and 6: Identification—Major Components88
Page 7 and 8: Assembly and Operation Instructions
Page 19: Assembly and Operation Instructions
Page 23 and 24: Laying Out One-Shot 90° Bends881 a
Page 25 and 26: Laying Out Two-Shot 90° Bends for3
Page 29 and 30: Special Bending Information Chart88
Page 31 and 32: Special Bending Information Chart (
Page 35 and 36: Identification—Major Components88
Page 37 and 38: Shoe Groups for the 881 and 881CT88
Page 39 and 40: Shoe Groups for the 881CT Only881 a
Page 41 and 42: Parts List—Ram (502 7416.3)881 an
Page 43 and 44: Parts List—1813 Bending Table (50

881 and 881CT Cam Track Hydraulic Benders

Create successful ePaper yourself

Delete template?

Save as template?