881 and 881CT Cam Track Hydraulic Benders

881 and 881CT Cam Track ® Hydraulic BendersIMPORTANT SAFETY INFORMATIONPinch points.Keep hands away from bendingshoe, follow bar, saddle, conduit,and other moving parts whenbender is in use. Failure to keephands away from these areas canresult in serious injury.Do not stand in direct line with the follow bar.A component failure could propel the follow barwith great force, striking nearby personnel.Failure to observe this warning could result insevere injury or death.Wear eye protection when operatingthe bender.Failure to wear eye protection canresult in serious eye injury fromflying debris or hydraulic oil.Inspect the bender, pump, and hose before eachuse. Replace damaged, worn, or missing parts withGreenlee replacement parts; a damaged or worncomponent may fail and strike nearby personnel.Do not operate while wearing loose clothing.Loose clothing could get caught in moving parts.Failure to observe this warning could result insevere injury.Some bender parts and accessories are heavy andrequire more than one person to lift and assemble.Failure to observe this precaution could result ininjury or property damage.Do not stand in direct line with the hydraulic ram.A component failure could propel parts with greatforce, striking nearby personnel.Failure to observe this warning could result insevere injury or death.Make sure all hose fittings are properly seatedbefore starting the bend. Incomplete connectionsmay not allow the ram to retract after the bend iscomplete.Follow the instructions and safety informationsupplied with your hydraulic pump.