EXHIBITOR MANUAL

1 2 3 4 5 6 7 8 9 10
electrical
fixtures and fittings
120w spotlight low voltage spotlight 300w halogen floodlight
A general purpose spotlight for highlighting
smaller exhibits, posters and graphics. Also
available as a 300mm long arm fitting.
A 50w low voltage halogen fitting giving a bright
white beam of light, with a low heat output and
integral transformer. Ideal for highlighting
natural colours in exhibits.
Provides a broad beam of white halogen light,
useful to flood big exhibits or large display areas.
Also available as a 500mm long arm fitting.
NOTE: These fittings must be placed at a height
of 2.25m or above, due to their high heat output.
low voltage downlighter
soft wind fan
100w wall light
A 50w low voltage halogen fitting giving a bright
white beam of light. Available as a straight
downlighter or as an adjustable eyeball.
NOTE: Space is required for the remote
transformer close to the fitting.
Provides a soft movement of air. Useful in areas
which are prone to a build up of heat, such as
under lights.
A 100w fitting, fixed to a wall, emitting a soft
level of lighting. Ideal for lounge areas.
fluorescent fittings
Available in a variety of standard lengths, these
fittings provide a good level of general
illumination to stands. Note: not suitable for
highlighting specific exhibits.
ceiling battens
All of the fittings above, with the exception of
the wall lights and downlighters, will require
additional ceiling battens, unless fixed to the
back of the shell scheme fascia board or
stand walls.
This leaflet illustrates a selection of fittings from our full range. Individual fittings may vary according to stock availability
Precision & Expertise - essential qualities in exhibition services
INTERNATIONAL