CATALOGUE
ZHP08C/GB -72 dpi - versione 20080916 - Zucchini
ZHP08C/GB -72 dpi - versione 20080916 - Zucchini
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
SCP Features<br />
SCP is the Zucchini line used for transport and<br />
distribution of High Power, and is also highly<br />
valued in rising mains.<br />
The applications include all industrial, commercial<br />
and service sector buildings ( factories, banks,<br />
trade and business centres, hospitals, etc.)<br />
The Super Compact SCP line is available in the<br />
standard range: from 630A to 4000A with<br />
aluminum alloy conductors and from 800A<br />
to 5000A with copper conductors.<br />
The super-compact dimensions of the SCP<br />
enhance its resistance to short circuit<br />
stresses; in addition, they can reduce the<br />
impedance of the circuit by controlling the<br />
voltage drops and allow for the installation<br />
of high power electrical systems, even in<br />
extremely confined spaces.<br />
SCP is available with a wide selection of tapoff<br />
boxes that range from 63A up to 1250A,<br />
thus allowing you to locally protect and feed<br />
different types of loads by housing protective<br />
devices such as fuses, MCCBs and motorised<br />
switches.<br />
SCP, as all Zucchini products, is not only in<br />
compliance with the harmonised Standards<br />
CEI EN 60439-1 / 2 but also answers<br />
specifically to many clients needs for more<br />
severe conditions of use. Thus the rated<br />
current of Zucchini’s busbar trunking systems<br />
is always referred to the average ambient<br />
temperature of 40 °C against the 35 °C<br />
required by the Standard, thus providing the<br />
markets with suitably upgraded products.<br />
The nominal range of all SCP Super-Compact<br />
busbars is guaranteed both for horizontal<br />
installations (flat and edgewise) and for vertical<br />
installations without downgrading.<br />
SCP busbar trunking systems are designed so<br />
that they can be maintenance-free, except<br />
for the periodic and compulsory inspections<br />
required by the Standard IEC 60364.<br />
The tightening torque inspection of the junction<br />
can be carried out by qualified personnel, even<br />
when the busbar is energized.<br />
8 SUPER COMPACT