CATALOGUE

More documents

Recommendations

Info

Installation guidelines MINIMUM DISTANCE OF THE WALL / CEILING ELEMENTS Wall Ceiling Ceiling 100 100 300 100 Wall Wall 300 When there are tap-off units along the busbars, the minimum distances depend on the dimensions of the tap-offs selected. Wall Ceiling 300 Wall 300 300 * * When there is a tap-off box installed above the busbar, check the overall dimension of the open cover of the tap-off unit used in the section specified on pages 35-38 Wall Ceiling 100 100 300 80 Wall 80 Minimum installation distance when there are several adjacent lines Wall Ceiling 100 100 300 Wall 60 (For further information, please refer to the technical guide) Minimum installation distance when there are several overlapped lines 50 SUPER COMPACT
SCP SUPER COMPACT Installation guidelines INSTALLATION SEQUENCE OF THE JUNCTION The installation instructions are placed on every element near the junction (Fig.1) Make sure that the contacts are clean. 30 mm Join the two elements together. (Fig. 1) (Fig. 2) 270 mm Make sure that the earth plate of the straight element is inserted behind the front plate of the junction monobloc (Fig.2) The positioning pin on the monobloc should be fitted into the corresponding slot on the earth plate. Verify the distance between elements, 270mm, before tightening the monobloc completely (Fig.3). (Fig. 3) Tighten the bolt of the monobloc until the 1st head breaks off (Fig. 4). The bolt that tightens the monobloc has a second head which is used when carrying out operations or inspections on the line. The nominal tightening torque is 85Nm. (Fig. 4) 85Nm Install the covers of the junction (Fig. 5). (Fig. 5) Connection completed correctly with degree of protection IP55 (Fig. 6). For further information, please refer to the technical guide. (Fig. 6) 51 HIGH POWER GENERAL <strong>CATALOGUE</strong>
Page 1: High Power SCP - HR - EdM CATALOGUE
Page 4 and 5: Integrated solutions for global pro
Page 6 and 7: HIGH POWER A simple and innovative
Page 8 and 9: SUPER COMPACT - SCP 6 SUPER COMPACT
Page 10 and 11: SCP Features SCP is the Zucchini li
Page 12 and 13: General structural features The out
Page 14 and 15: Main features of the SCP line Strai
Page 16 and 17: Feeder elements FEEDER ELEMENT - ST
Page 18 and 19: Trunking components EXPANSION ELEME
Page 20 and 21: Direction changes HORIZONTAL ELBOW
Page 22 and 23: Direction changes DOUBLE HORIZONTAL
Page 24 and 25: Direction changes DOUBLE ELBOW HORI
Page 26 and 27: Direction changes VERTICAL “T”
Page 28 and 29: Connection interfaces STANDARD CONN
Page 30 and 31: Connection interfaces CONNECTION IN
Page 34 and 35: Connections interfaces CONNECTION I
Page 36 and 37: Complementary run components SECTIO
Page 38 and 39: Feed units END FEED UNIT Aluminium
Page 40 and 41: Tap-off boxes EMPTY TAP-OFF BOX 125
Page 42 and 43: Tap-off boxes EMPTY TAP-OFF BOX 63A
Page 44 and 45: Fixing supports BRACKETS FOR VERTIC
Page 46 and 47: Transposition element End cover TRA
Page 48 and 49: Operating instructions on how to de
Page 50 and 51: The system: The EdM transformer adv
Page 54 and 55: Measurement of special element leng
Page 56 and 57: 130 Technical data SCP (3L+N+PE) N
Page 58 and 59: 140 SCP Technical Data Functional E
Page 60 and 61: 140 “Double neutral” technical
Page 62 and 63: Suggestions for the project develop
Page 64 and 65: HIGH RATING - HR 62 HIGH RATING
Page 66 and 67: HR Features HR is the Zucchini line
Page 68 and 69: Main features of the HR line Straig
Page 70 and 71: Feeder elements FEEDER ELEMENT Alum
Page 72 and 73: Direction changes VERTICAL ELBOW Al
Page 74 and 75: Direction changes DOUBLE VERTICAL E
Page 76 and 77: Direction changes DOUBLE ELBOW VERT
Page 78 and 79: Direction changes HORIZONTAL “T
Page 80 and 81: Connection interfaces STANDARD CONN
Page 88 and 89: Feed units END FEED UNIT Aluminium
Page 90 and 91: Tap-off boxes WITH AC 23A SWITCH DI
Page 92 and 93: Zucchini transformer connections FL
Page 94 and 95: Installation instructions INSTALLAT
Page 96 and 97: 340 235 Technical data PE H PE H N
Page 98 and 99: Certificates The High Rating has be
Page 100 and 101: EdM CAST RESIN TRANSFORMERS 98 EdM
Page 102 and 103:
EdM cast resin transformers EdM has
Page 104 and 105:
Applications for EdM cast resin tra
Page 106 and 107:
EdM range The EdM range of cast res
Page 108 and 109:
Benefits of an EdM transformer The
Page 110 and 111:
The EdM technology Medium-voltage w
Page 112 and 113:
EdM cast resin transformers: the pe
Page 114 and 115:
The CLE range (certified low electr
Page 116 and 117:
Installing an EdM transformer EdM c
Page 118 and 119:
12 kV insulation class Technical in
Page 120 and 121:
Page 122 and 123:
17.5 kV insulation class Technical
Page 124 and 125:
17.5 kV insulation class Technical
Page 126 and 127:
Page 128 and 129:
Page 130 and 131:
Page 132 and 133:
LV connection terminals STANDARD DR
Page 134 and 135:
Accessories TEMPERATURE MEASUREMENT
Page 136:
Zucchini SpA Via Conicchio, 34 2513
show all

CATALOGUE

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?