Dissertations in Forestry and Natural Sciences

Taneli Väisänen: Effects of Thermally Extracted Wood Distillates on
the Characteristics of Wood-Plastic Composites
ISO 179-1. Plastics. Determination of Charpy Impact Properties. Part 1:
Non-instrumented Impact Test. International Organization for
Standardization. 19th May, 2010.
ISO 527-1. Plastics. Determination of Tensile Properties. Part 1: General
Principles. International Organization for Standardization. 14th
February, 2012.
ISO 16000-6. Indoor air - Part 6: Determination of volatile organic
compounds in indoor and test chamber air by active sampling on
Tenax TA sorbent, thermal desorption and gas chromatography
using MS or MS-FID. International Organization for Standardization.
1st January, 2011.
ISO 16000-9. Indoor air - Part 9: Determination of the emission of
volatile organic compounds from building products and
furnishing - Emission test chamber method. International
Organization for Standardization. 16th January, 2006.
Jesson DA and Watts JF. The interface and interphase in polymer
matrix composites: Effect on mechanical properties and methods
for identification. Polym Rev. 52 (3), pp. 321-354, 2012.
Kim J and Pal K. Overview of wood-plastic composites and uses. In:
Kim J and Pal K (Eds.). Recent Advances in the Processing of
Wood-Plastic Composites. Springer, Berlin, Germany, pp. 1-22, 2010.
Klass DL. Thermal conversion: Pyrolysis and liquefaction. In: Klass DL
(Ed.). Biomass for Renewable Energy, Fuels, and Chemicals.
Academic Press, Oval Road, London, pp. 225-269, 1998.
Klyosov A. Wood-Plastic Composites. John Wiley & Sons, Hoboken, NJ,
US, 2007.
Kociszewski M, Gozdecki C, Wilczyski A, Zajchowski S, and
Mirowski J. Effect of industrial wood particle size on mechanical
properties of wood-polyvinyl chloride composites. Eur J Wood
Prod. 70 (1-3), pp. 113-118, 2012.
124 Dissertations in Forestry and Natural Sciences No 222