Brother FAX-575/FAX-575e - User's Guide
Brother FAX-575/FAX-575e - User's Guide
Brother FAX-575/FAX-575e - User's Guide
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
VOLUME AMPLIFY: ON–TEMPORARY<br />
This setting is appropriate if some of the users are<br />
hearing-impaired. During a conversation, users can press<br />
or on the control panel to adjust the volume to LOW or<br />
HIGH. When the handset is replaced, the handset volume returns<br />
to the default setting of LOW.<br />
VOLUME AMPLIFY:ON–PERMANENT<br />
Choose VOL AMPLIFY: ON?–PERMANENT? if all of the users are<br />
hearing-impaired. During a conversation, users can press<br />
or on the control panel to adjust the volume to LOW or<br />
HIGH. When the handset is replaced, the handset volume returns<br />
to the default setting of amplify.<br />
▲<br />
▲<br />
▲<br />
▲<br />
When you press or on the control panel to adjust<br />
the volume, the LCD shows the setting you are choosing.<br />
Each key press changes the volume to the next setting.<br />
▲<br />
▲<br />
It is important that you do not choose PERMANENT unless all<br />
users are hearing-impaired. Otherwise, the default setting of<br />
amplify may damage the hearing of some users.<br />
Setting Volume Amplify<br />
Please carefully read Choosing the Handset Volume (For<br />
Volume Amplify) on page 4-4 before you do the following<br />
steps:<br />
1 Press Menu/Set, 1, 4.<br />
2 If none of the users are<br />
hearing-impaired, press ▲ or ▼ to select<br />
4.VOLUME AMPLIFY<br />
VOL AMPLIFY:OFF?, and then press Menu/Set and go to<br />
Step 4.<br />
—OR—<br />
If some or all of the users are hearing-impaired, press ▲ or ▼<br />
to select VOL AMPLIFY:ON?, and then press Menu/Set.<br />
3 If all the users are hearing-impaired, press ▲ or ▼ to select<br />
PERMANENT?, and then press Menu/Set.<br />
—OR—<br />
If only some of the users are hearing-impaired, press ▲ or ▼<br />
to select TEMPORARY, and then press Menu/Set.<br />
4 Press Stop/Exit.<br />
4 - 5 Initial Setup