Samsung 27" SE370 LED Monitor with Wireless Charging - LS27E370DS/ZA - User Manual ver. (ENGLISH,1.83 MB)

- - Your mobile device may slip, depending
on the material and shape of the back
of the device. Use the anti-slip pad
included in the package.
Precautions
――
Make sure to read the user manual before use to ensure that you use the monitor properly and safely.
――
This wireless charging monitor is compatible with Qi-certified devices (receivers).
――
This monitor uses a magnetic induction system and has obtained Qi certification for wireless charging from the Wireless Power Consortium (WPC).
The monitor can charge mobile devices made according to Qi standards. Do not use the monitor to charge a device that has not been manufactured according to
Qi standards (certification).
――
Make sure to use the standard monitor adapter that came with the monitor.
Connect the adapter to the monitor,
then check the effective wireless
charging range indicated on the stand.
Next, place your mobile device in the
Centre of the range. Make sure that the
device supports wireless charging.
After placing the mobile device in the
correct position, make sure that the
device starts charging.
The charging progress is indicated by
the LED at the bottom of the stand,
in addition to sound, message and
charging icon notifications on the
device.
Wireless charging may not work or the
mobile device may fall off if the device
is not correctly positioned inside the
effective wireless charging range. This
range is marked with a circle.
The mobile device may not charge in
the following cases: the device is placed
outside the wireless charging range, the
device screen is facing downwards, or
the device is far from the charging point.
Do not place the wireless charging cover
in the wireless charging area without a
mobile device.
The monitor may overheat and fail. An
overheating monitor can also cause
heat burns or fire.
28