icotek Cable Entry Systems from icotek

MSKL type with large
clamping range
Large contact area
to the cable shield.
Shield and cable strands
will not be squeezed
A: B:
Figure A: SKL-line
Figure B: Conventional
systems
Available in various
sizes
X
Do not use the shield
connection as a strain relief
location!
High cable density
possible
Vibration resistance
and twist protection
due to solid rivets
Wide variety in
mounting types:
DIN rail/C-rail snap mount,
screw mount ...
Secure hold for cable ties and
cables, strain relief acc. to
EN 62444
4.1
EMC Shield Clamps MSKL
Due to its special design, the clamping ranges of the MSKL
are very large while the dimensions are comparatively small.
(Example: MSKL 3-12, assembled with a 12 mm cable shield:
width 26.25 mm).
Advantages & Benefits
▀
▀
▀
▀
▀
▀
▀
Large clamping areas, therefore less product sizes
needed to cover a large cable diameter range
Space-saving design, even when fully assembled
Partially with integrated strain relief
Large cable shield contact area
Easy assembly
The spring design requires no adjustments and will
permanently maintain contact to the cable shield
Shock and vibration resistant, maintenance free
More information about the connection between the cable shield and
the equipotential bonding bar in PROFINET applications:
www.icotek.com/us/profinet
127