icotek Cable Entry Systems from icotek

IP54
Push-In, Split Cable Entry Plates
with IP54 Rating
KEL-QTA | KEL-QTE
Product Description
Push-In, split cable entry plates (IP54) for routing pre-terminated and
standard cables utilising split QT grommets or membranes. Suitable for
cut-outs for 10- and 24-pin industrial connectors. The compact size KEL-
QTA-B is suitable for cut-outs 45.5 x 45.5 mm. The round versions of the
KEL-QTA are suitable for cut-outs 32 / 50 mm in diameter.
1.23
The KEL-QTA/KEL-QTE easily routes pre-terminated cables, multi-conductors,
hoses or conduits without using any tools for assembly.
The KEL-QTE fits on cut-outs of 20 mm in diameter.
Advantages & Benefits
▀
▀
▀
▀
▀
Fast and easy assembly without tools
High cable density by using multi-position grommets
Simple assembly and disassembly in case of change or service
Routing of cables with and without connectors in a high density
Suitable for standard industrial connector cut-outs
Specifications
Material
Flame class
IP rating
Temperature
Properties
Cut-out dimension
Frame depth
Elastomer
UL94-V0, self-extinguishing
IP54, with correct selection of the cable grommets
(QT single)
- 40°C to + 100°C (static)
Halogen-free, silicone-free
Metric sizes (QTE)
5 mm (QTA)
KEL-QTE (Patent)
Type A:
Type B:
Accessories
QT Cable grommets
ST-B Plugs
FP Flange plates
For wall thickness 1.5 - 2.5 mm/0.059 - 0.098"
For wall thickness 2.8 - 4 mm/0.11 - 0.157"
72
107
210 - 219
69