icotek Cable Entry Systems from icotek
icotek offers a broad range of cable management & cable entry systems for applications where contamination by water, dust, vibration or temperatures occur.
icotek offers a broad range of cable management & cable entry systems for applications where contamination by water, dust, vibration or temperatures occur.
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
NEW IP55<br />
EMC-KEL-DS<br />
EMC <strong>Cable</strong> <strong>Entry</strong> Frames<br />
Product Description<br />
The EMC cable entry frame EMC-KEL-DS has been metallised (galvanise<br />
coated) to create a conductive surface.<br />
The front cable grommet (A) is used for strain relief and cable sealing on the<br />
cable jacket. The cable shield is contacted over 360° via the rear conductive<br />
grommet (B).<br />
The contact between the EMV-KEL-DS and the conductive housing wall is<br />
realized via the included conductive flat gasket.<br />
Advantages & Benefits<br />
▀ Perfect for already pre-terminated cables. The connector does not have<br />
to be removed for wiring<br />
▀ Strain relief and sealing are separated <strong>from</strong> the EMC contact<br />
▀ Both conducted and field-bound disturbances are reliably diverted<br />
▀ Very attractive and scratch-resistant surface<br />
▀ Contacting the cable shield over 360°<br />
▀ EMC grommets made entirely <strong>from</strong> conductive elastomer<br />
▀ Very good dissipation values<br />
▀ Very good shielding effect with regard to EMC tightness<br />
▀ Integrated strain relief<br />
▀ Protection class IP55<br />
4.2<br />
Specifications<br />
Material<br />
Flame class<br />
Operating<br />
temperature<br />
Properties<br />
Frame depth<br />
IP rating<br />
Polyamide, highly conductive coating<br />
acc. to UL 94 HB<br />
-40°C to +140°C<br />
-40°F to +284°F<br />
Halogen free, silicone free<br />
40 mm / 1.575"<br />
IP55<br />
Accessories<br />
Front<br />
Back<br />
EMC-KT grommets<br />
KT grommets<br />
176 - 177<br />
48 - 52<br />
(A) KT cable grommet<br />
for strain relief<br />
and cable sealing<br />
(B) EMC-KT cable<br />
grommet for contacting<br />
the cable shield<br />
170
Change language