icotek Cable Entry Systems from icotek

IP54
QT-AT-PP
Adapter grommet
for PushPull Connector Systems
IP54
1.24
Product Description
The grommet QT-AT-PP is constructed on the basis of
a large QT cable grommet. In this elastomer grommet,
a polyamide body is integrated. All modules based
on the PushPull system can be inserted into the
grommet.
Type Order No. Height × width × length [mm] Material PU
QT-AT-PP 42602
39 x 40 x 17
1.535 x 1.575 x 0.669"
PA / Elastomer 10
By using the grommet QT-AT-PP, the split cable entry
frame can be used to route pre-terminated cables and
at the same time it can also be used as an interface
for connectors. This can save additional cut-outs and
reduce labour costs.
PushPull modules and add-on housings are not
included in the scope of delivery.
Advantages & Benefits
▀
▀
▀
▀
▀
By using QT-AT-PP grommets, panel connectors and
sockets can be integrated directly into the cable
entry system
Separate cut-outs for connectors are no longer
necessary
Time saving solution
Space-saving solution
Assembly costs are reduced
Specifications
Material
Flame class
Protection class
Temperature
Properties
Grommet: Elastomer
Body with thread: Polyamide
UL94-V0, self-extinguishing
IP54 when using correct
components
-40°C to +100°C (static)
-40°F to +212°F (static)
Halogen free, silicone free
The module (left) snaps into the rear of the add-on
housing mounted on the AT-PP.
78