icotek Cable Entry Systems from icotek

1.22
Split Cord Grips
for the QT Grommet System
IP54
+212°F
-22°F
1–15 mm
1.22
By using split QVT cord grips by icotek cables with or without connectors
or complete cable harnesses with diameters from 1 to 15 mm can be
quickly routed into enclosures, cabinets or machines and be sealed with
IP54 rated ingress protection.
The split system of the QVT cord grips enables quick and easy assembly
which is great for retrofitting and maintenance. The cable is placed into
the slit grommet which is set into one of the gland halves. Depending
on the size of the cord grip one, two or four separate grommets can be
installed. The two gland halves can be easily snapped together without
the need of tools. The routed lines are securely sealed and held inside the
grommets. To mount the cord grips either snap it into the round metric
standard cut-out (sizes available from M16 to M50) or screw it with a hexagonal
locknut. The mounting method is dependent on the model type.
∅ D
For metric cut-outs
M16 - M50
Warranty on pre-terminated
cables remains
Split system
Special locknuts for e.g. D-Sub or
PROFIBUS connectors as well as
split locknuts available.
QVT-CLICK
High cable density,
wide variety in cable
grommets
Fast and easy assembly
IP54
IP54
Grommets QUICK
for Cables with/without
Connectors,
Cable Diameter range 1 – 15 mm
IMAS-CONNECT
Modular Adapter System
for the QT System
64
QT / QTMB / QT-DT /
QT Servicebox
72 – 75 76 – 81