icotek Cable Entry Systems from icotek

More documents

Info

NEW IP55 EMC-KEL-DS EMC Cable Entry Frames Product Description The EMC cable entry frame EMC-KEL-DS has been metallised (galvanise coated) to create a conductive surface. The front cable grommet (A) is used for strain relief and cable sealing on the cable jacket. The cable shield is contacted over 360° via the rear conductive grommet (B). The contact between the EMV-KEL-DS and the conductive housing wall is realized via the included conductive flat gasket. Advantages & Benefits ▀ Perfect for already pre-terminated cables. The connector does not have to be removed for wiring ▀ Strain relief and sealing are separated from the EMC contact ▀ Both conducted and field-bound disturbances are reliably diverted ▀ Very attractive and scratch-resistant surface ▀ Contacting the cable shield over 360° ▀ EMC grommets made entirely from conductive elastomer ▀ Very good dissipation values ▀ Very good shielding effect with regard to EMC tightness ▀ Integrated strain relief ▀ Protection class IP55 4.2 Specifications Material Flame class Operating temperature Properties Frame depth IP rating Polyamide, highly conductive coating acc. to UL 94 HB -40°C to +140°C -40°F to +284°F Halogen free, silicone free 40 mm / 1.575" IP55 Accessories Front Back EMC-KT grommets KT grommets 176 - 177 48 - 52 (A) KT cable grommet for strain relief and cable sealing (B) EMC-KT cable grommet for contacting the cable shield 170
IP55 EMC-KEL-DS EMC Cable Entry Frames IP55 Description Cut-out | Drilling template Type Order No. Cut-out mm KT Grommets small | large EMC grommets small| large PU 58 32 147 130 147 130 147 130 130 112 36 5,5 32 EMC-KEL-DS 24|10 99410 112 × 36 mm 10 | – 10 | – 1 5,80 147 130 147 130 147 130 58 32 58 32 5,80 58 32 5,80 58 32 5,80 5,80 147 130 147 130 147 130 58 32 58 32 5,80 130 112 5,5 36 32 EMC-KEL-DS 24|7 99411 112 × 36 mm 6 | 1 6 | 1 1 58 32 130 112 5,5 58 32 36 32 EMC-KEL-DS 24|4 99412 112 × 36 mm 2 | 2 2 | 2 1 5,80 5,80 5,80 4.2 ~145 130 ~2,5 112 ~56 32 36 EMC gasket size 24 conductive gasket for EMC-KEL-DS 98047 112 × 36 mm – – 1 Ø 6 Ø 38 Ø 33 2,5 Ø 70 Ø 63 2,5 171
Page 1 and 2:
North America Product Catalog 33 Ca
Page 3 and 4:
Product Groups 1.11 Split Cable Ent
Page 5 and 6:
ProductFinder Product IP54 IP66 IP6
Page 7 and 8:
Chapter Content 1.11 IP66 IP54 IP54
Page 9 and 10:
IP65 IP66 UL TYPE UL TYPE KEL-ER Ca
Page 11 and 12:
39,5 13 26,5 39,5 13 26,5 39,5 39,5
Page 13 and 14:
IP54 UL TYPE KEL-U Cable Entry Fram
Page 15 and 16:
83 65 5,5 130 112 36/46 32 5,5 58 4
Page 17 and 18:
IP54 UL TYPE KEL Cable Entry Frames
Page 19 and 20:
IP54 UL TYPE KEL Cable Entry Frames
Page 21 and 22:
IP54 KEL Cable Entry Frames KEL-24-
Page 23 and 24:
5,5 5,5 5,5 5,5 5,5 5,5 5,5 5,5 5,5
Page 25 and 26:
5,5 5,5 5,5 5,5 5,5 5,5 IP54 KEL Ca
Page 27 and 28:
IP54 UL TYPE KTMB 183 Grommets for
Page 29 and 30:
IP54 FT Grommets for Flat Cables IP
Page 31 and 32:
1.11 IP54 UL TYPE 130 KEL-FG Flange
Page 33 and 34:
IP54 UL TYPE KEL-FG Flange Enclosur
Page 35 and 36:
. Format: A4 Format: Format: Format
Page 37 and 38:
IP54 UL TYPE Advantages & Benefits
Page 39 and 40:
Page 41 and 42:
IP66 IP68 UL TYPE UL TYPE KVT-ER Sp
Page 43 and 44:
IP54 UL TYPE KVT Split Cord Grips I
Page 45 and 46:
IP54 KVT-SNAP Split Pluggable Cord
Page 47 and 48:
KT ServiceBox Service Box for Cable
Page 49 and 50:
IP54 UL TYPE KT Grommets, small, mu
Page 51 and 52:
IP54 UL TYPE KT-DPF | KT-SC | KTMB
Page 53 and 54:
UL TYPE ST Plugs for Cable Grommets
Page 55 and 56:
Page 57 and 58:
IP54 AT-KS Adapter Grommet for Keys
Page 59 and 60:
IP65 AT-M | AT-B Adapter Grommet wi
Page 61 and 62:
IP54 Cable Entry Frames for Quick A
Page 63 and 64:
IP54 130 112 130 112 103 86 130 112
Page 65 and 66:
IP54 Split Cord Grips with IP54 Rat
Page 67 and 68:
IP54 QVT-CLICK Split Pluggable Cord
Page 69 and 70:
IP54 Push-In, Split Cable Entry Pla
Page 71 and 72:
IP54 KEL-QTA | KEL-QTE Split Cable
Page 73 and 74:
IP54 40 QTMB Multi-Range Cable Grom
Page 75 and 76:
QT ServiceBox Service Box for Cable
Page 77 and 78:
Page 79 and 80:
IP54 QT-AT-KS Adapter Grommet for K
Page 81 and 82:
IP54 QT-AT-M Adapter Grommet with M
Page 83 and 84:
58 32 29 5,8 KEL-BES-S Split Brush
Page 85 and 86:
1.1 1.2 KEL-JUMBO 2/ KEL 24|x Routi
Page 87 and 88:
ProductFinder Product IP54 IP64 IP6
Page 89 and 90:
Page 91 and 92:
IP66 IP68 UL TYPE UL TYPE 58 32 Ø
Page 93 and 94:
58 32 58 32 58 32 5,90 147 130 147
Page 95 and 96:
IP66 KEL-DPZ Cable Entry Plates KEL
Page 97 and 98:
IP65 IP66 UL TYPE 130 112 103 86 13
Page 99 and 100:
IP66 IP68 UL TYPE UL TYPE KEL-DPZ r
Page 101 and 102:
IP64 UL TYPE KEL-DP Cable Entry Pla
Page 103 and 104:
Zeichnungsvermerke Ursprung Zeichnu
Page 105 and 106:
IP65 UL TYPE KEL-DP round Cable Ent
Page 107 and 108:
ST-B Plugs for Membranes Type Order
Page 109 and 110:
Page 111 and 112:
IP65 KEL-SCDP | KEL-SCDP-RW Cable E
Page 113 and 114:
8 99 77 IP66 IP68 89 64 71,4 82,4 7
Page 115 and 116:
IP54 UL TYPE KEL-JUMBO flex Cable E
Page 117 and 118:
Chapter Content 3 Cable Clamp for C
Page 119 and 120: ZL Strain Relief Plates for Screw A
Page 121 and 122: ZL 03 | 04 | 05 Strain Relief Plate
Page 123 and 124: SF|ZL Strain Relief Plates for 35 m
Page 125 and 126: KBH Holder for Hook-and-Loop Fasten
Page 127 and 128: MSKL type with large clamping range
Page 129 and 130: Chapter Content 4.1 EMC Shield Clam
Page 131 and 132: EMC Shield Clamps on Cable Lugs for
Page 133 and 134: EMC Shield Clamps for Assembly with
Page 135 and 136: EMC Shield Clamps for 35 mm DIN Rai
Page 137 and 138: EMC Shield Clamps for 10 × 3 mm Bu
Page 139 and 140: EMC Double Shield Clamps for 10 ×
Page 141 and 142: EMC Shield Clamps for 30 mm C-Rails
Page 143 and 144: Set of EMC Shield Clamps and Cable
Page 145 and 146: EMC Shield Clamps for Assembly on S
Page 147 and 148: EMC Double Shield Clamps for Assemb
Page 149 and 150: STFZ|SKL EMC Terminal Clamps for Pe
Page 151 and 152: STFZ-U | STFZ-SP | STFZ2-SP EMC Ter
Page 153 and 154: EMC ServiceBox Service Box with Ass
Page 155 and 156: RLFZ | SC|RLFZ EMC Clamp Assembly w
Page 157 and 158: RLF EMC Clamp Assembly Configure on
Page 159 and 160: KEL-EMC-PF Grounding Mount, Bracket
Page 161 and 162: KVT-EMC EMC Bracket for Cord Grips
Page 163 and 164: ZL|SB-EMC Shield Plates for ZL Stra
Page 165 and 166: MB Ground Straps Typ Art.-Nr. Läng
Page 167 and 168: EMC Customized Solutions 4.1 167
Page 169: Chapter Content 4.2 IP55 IP55 EMC C
Page 173 and 174: IP55 EMC-KVT-DS EMC Split Cable Gla
Page 175 and 176: EMC-KEL EMC Cable Entry Frames 147
Page 177 and 178: IP54 EMC-KT EMC Grommets IP54 Descr
Page 179 and 180: Assembly Possibilities Conducted an
Page 181 and 182: Chapter Content 5 IP54 Bulkhead Fit
Page 183 and 184: IP54 FWS-B Bulkhead Fittings for D
Page 185 and 186: WS Corrugated Conduits Type Externa
Page 187 and 188: SH Conduit Clips for WST Type Order
Page 189 and 190: Chapter Content 6 IP54 IP54 Rittal
Page 191 and 192: IP54 KDRS-ESR-VX25 Rittal Enclosure
Page 193 and 194: IP54 KDRS-ESR-VX25 Rittal Enclosure
Page 195 and 196: IP54 KDR-ESR-TS8 Rittal TS8 Enclosu
Page 197 and 198: IP54 KDR-ESR-HG2 Enclosure Gland Pl
Page 199 and 200: IP54 KDR 2-VX25 | KDR 2-TS8 Split R
Page 201 and 202: KDR-BES-U Brush Strip for Gland Pla
Page 203 and 204: KDR-BES Enclosure Gland Plate with
Page 205 and 206: Bischof-von-Lipp-Straße 1 D-73569
Page 207 and 208: IP54 KDR-BMP for VX25 Enclosure Gla
Page 209 and 210: IP54 KDR-BMP for TS8 Enclosure Glan
Page 211 and 212: IP66 FP-AX Flange Plates for Compac
Page 213 and 214: IP66 FP-AX Flange Plates for Compac
Page 215 and 216: IP55 FP-KX/KL Flange Plates for Jun
Page 217 and 218: IP66 FP-AE Flange Plates for Compac
Page 219 and 220: IP54 FP-BG | FP-FL21 Flange Plates
Page 221 and 222:
IP66 BPM Metal Blank Plates IP66 Ty
Page 223 and 224:
MF Supports for DIN Rails and Bus B
Page 225 and 226:
KGM | GMT Locknuts Type KGM: SUB-D9
Page 227 and 228:
Chapter Content 7 Punch driver sets
Page 229 and 230:
Rectangular & Square Punches Sized
Page 231 and 232:
Round Punches for stainless steel,
Page 233 and 234:
NEW Cable Entry Plates KEL-DPZ-HD H
Page 235 and 236:
1935/ 2004/ EG EU VO. 10/2011 HYGIE
Page 237 and 238:
9 Cable Entry Systems with IFPS Fir
Page 239 and 240:
up to IP68 UL TYPE UL TYPE Cable En
Page 241 and 242:
IP66 IP68 UL TYPE UL TYPE icotek Pr
Page 243 and 244:
Download the latest version here: w
Page 245 and 246:
Appendix Reference list 3|4 Order N
Page 247 and 248:
Made in Germany Free Product Sample
show all

icotek Cable Entry Systems from icotek

Create successful ePaper yourself

Delete template?

Save as template?