icotek Cable Entry Systems from icotek
icotek offers a broad range of cable management & cable entry systems for applications where contamination by water, dust, vibration or temperatures occur.
icotek offers a broad range of cable management & cable entry systems for applications where contamination by water, dust, vibration or temperatures occur.
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Round Punches<br />
for Steel and Aluminum,<br />
for cut-outs PG & M16 – M85<br />
3-fold slug splitting<br />
Punch set M16 - M63<br />
Order No. 80007<br />
Product Description<br />
Self-centering knockout punches for mild steel, aluminum<br />
and plastic walls. Punches available for cut-outs<br />
PG 16, M16, M20, M25, M32, M40, M50, M63, M75 and<br />
M85. Cut-outs for <strong>icotek</strong> split cable glands and round<br />
cable entry plates can be punched.<br />
The special cutting geometry of the punch reduces the<br />
cutting pressure and therefore the required effort. The<br />
punch splits slugs into several pieces (type related)* for<br />
easy slug removal. For installation of round switches<br />
<strong>icotek</strong> offers a PG 16 punch with an integrated 3 mm<br />
twist protection notch.<br />
Type<br />
Punches for steel and aluminum<br />
Punch set<br />
M16 – M63<br />
Punch M16<br />
Punch M20<br />
Cut-out diameter<br />
16.2 – 63.5 mm<br />
0.638" – 2.5"<br />
16.2 mm<br />
0.638"<br />
20.4 mm<br />
0.803"<br />
Max. sheet<br />
thickness<br />
M16 – M25:<br />
2.0 mm/0.079"<br />
M32 – M63:<br />
3.0 mm/0.118"<br />
2 mm<br />
0.079"<br />
2 mm<br />
0.079"<br />
Thread ∅ Order No. PU<br />
9.5 mm/19 mm<br />
0.374" / 0.748"<br />
9.5 mm<br />
0.374"<br />
9.5 mm<br />
0.374"<br />
80007 1<br />
80020 1<br />
80021 1<br />
The punches are designed for manual and hydraulic<br />
operation.<br />
Advantages & Benefits<br />
▀<br />
▀<br />
Multiple splitting punches for easier slug removal/<br />
for easy punching<br />
Suitable with hand hydraulic punch driver by <strong>icotek</strong><br />
or other manufacturers<br />
Punch M25<br />
Punch M32<br />
Punch M40<br />
Punch M50<br />
25.4 mm<br />
1"<br />
32.5 mm<br />
1.28"<br />
40.5 mm<br />
1.594"<br />
50.5 mm<br />
1.988"<br />
2 mm<br />
0.079"<br />
3 mm<br />
0.118"<br />
3 mm<br />
0.118"<br />
3 mm<br />
0.118"<br />
9.5 mm<br />
0.374"<br />
19 mm<br />
0.748"<br />
19 mm<br />
0.748"<br />
19 mm<br />
0.748"<br />
80022 1<br />
80023 1<br />
80024 1<br />
80025 1<br />
Specifications<br />
Punch M63<br />
63.5 mm<br />
2.5"<br />
3 mm<br />
0.118"<br />
19 mm<br />
0.748"<br />
80026 1<br />
Material<br />
Steel, hardened and burnished<br />
Scope of Delivery<br />
Punch and die (without draw stud)<br />
Punch M75<br />
Punch M85<br />
75.5 mm<br />
2.972"<br />
86 mm<br />
3.386"<br />
2 mm<br />
0.079"<br />
2 mm<br />
0.079"<br />
19 mm<br />
0.748"<br />
19 mm<br />
0.748"<br />
80029 1<br />
80030 1<br />
Compatible with<br />
Hydraulic punch driver 228<br />
Punch PG 16<br />
Punch PG 16 with<br />
twist protection notch<br />
22.5 mm<br />
0.886"<br />
22.5 mm / 0.886"<br />
+ 3 mm / 0.118"<br />
notch<br />
3 mm<br />
0.118"<br />
3 mm<br />
0.118"<br />
9.5 mm<br />
0.374"<br />
9.5 mm<br />
0.374"<br />
80027 1<br />
80028 1<br />
7<br />
Draw stud<br />
for punches M16 – M25, ∅ 9.5 mm to ∅ 19 mm,<br />
L: 105 mm<br />
80200 1<br />
Draw stud for punches M32 – M85, ∅ 19 mm , L: 125 mm 80201 1<br />
Note: More PG sizes are available on request.<br />
*Except punches M75/M85<br />
230