Commercial Connectors - TTI Inc.

DisplayPort
USB/USB OTG
• Low cost, high performance serial I/O for data access
between computer and peripherals
• USB 2 .0 compliant
• Operates at 480Mb/s
• Shielded for EMI/RFI performance
• Receptacles available in through-hole, surface mount,
right angle, vertical and upright configurations
• Full range of standard connectors and cable
assemblies
In accordance to requirements outlined by the Electronics
Standards Association (VESA) for the DisplayPort
1 .1 Standard Video, Molex announces the external
DisplayPort* Interconnect System . This external system
is a development of the next generation digital interface
for the PC and CE market . It consists of the plug and
receptacle . This new connector has the ability to deliver
high-definition digital video and audio to the display
device via the same cable, thus reducing cost . The ease
of the plug-and-play feature makes it user-friendly for
consumers . This also means that connections between
source and display devices without the need for signal
translation . Such direct connection capability simplifies
display product design and reduces costs .
VESA has outlined the following main industry objectives
for developing the DisplayPort:
• Unify external and internal display interfaces
• Provide scalable performance in terms of resolution,
color depth, and refresh rate over fewer wires to
support emerging displays needs
• Provide a feature foundation for new display usages
• Provide a small, user-friendly external connector
• Accelerate deployment of protected digital
outputs on PCs to broadly support authorized
viewing of protected content
• Enable a digital display connection as
a viable alternative to VGA
HandyLink ®
• 0 .80mm ( .031") pitch product family of connectors,
cable assemblies and accessories
• Circuit size range from 2 to 16 with optional voided pins
for customization
• 20,000 mating cycles
• 1 .5A to 3A per contact depending on circuit configuration
• Insert molded “sealed” design meets IP54 requirements
• Meets up to USB 2 .0 requirements for accessory linkages
www.ttiinc.com • 1-800-CALL-TTI
MicroCross DVI
Molex
• Allows high speed digital transmission (4 .95Gb/s single
link or 9 .9Gb/s dual link)
• Analog coaxial lines allows high speed analog transmission
(2 .5GHz)
• Fully shielded excellent EMI/RFI performance
• Protruding shield gives First Make/Last Break contact
• Rugged LFH contact design
• Provides two points of contact for optimal signal integrity
and reduces insertion force to ensure high reliability
Features & Benefits:
• Plastic locating peg
• Detent locks
• Optional latches
• Metal shielding on all sides
• Solder tab
• Polarized mating geometric
• Secure seating on PCB during soldering
• Strong mating between plug and receptacle
• Superior shielding against EMI
• Secure PCB retention and withstand lateral forces
• Less PCB real estate
• Prevents mis-mating
HDMI
Applications:
• Personal Computer (PC)
• External Display Interconnect
° Projector
° TV Display
• DVD Player
• Compact and user-friendly design
• Saves 40% PCB space over DVI
• 5 Gb/s bandwidth carries uncompressed audio/video in
a single cable
• HDMI to DVI cables are DVI backward compatible
• Mounting flange protects solder joints and gives additional
grounding
• Triad signal layout for low impedance mismatch
• Fully shielded ESD protection
25