Commercial Connectors - TTI Inc.
Commercial Connectors - TTI Inc.
Commercial Connectors - TTI Inc.
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Series 500 Low Profile D-Sub<br />
• Cost effective, highly reliable<br />
• 0 .318" right angle PCB connectors/low profile housing<br />
on straight PCB connectors<br />
• Drop-in replacements for standard unfiltered D-sub<br />
• Tubular feed-through capacitors<br />
• Ground plane design provides EMI shielding<br />
• 9, 15, and 25 shell sizes<br />
• Applications: PCs, Industrial, Graphics Workstations,<br />
PBX Comms Equipment, Base Stations, Medical<br />
Part Number Selection Guide<br />
Low Cost High<br />
Insertion Loss (db)<br />
Low Performance<br />
High<br />
100<br />
80<br />
60<br />
40<br />
20<br />
Series 400<br />
Chip Cap Competitor<br />
Series 100<br />
Series 500<br />
Thick Film Competitor<br />
Filtered USB <strong>Connectors</strong><br />
• Socket to right angle, through-hole or surface mount, and<br />
dual stacked socket right angle through-hole mount<br />
• USB 1 .1 capacitive filtering of: 10pF, 22pF, 33pF, 47pF,<br />
or 100pF<br />
• USB 2 .0 common mode inductive filtering, impedance<br />
90Ω ±25% at 100MHz<br />
• ESD USB’s use TVS diodes for protection and have a<br />
clamping voltage of 9 .8V<br />
www.ttiinc.com • 1-800-CALL-<strong>TTI</strong><br />
Series 700<br />
FILTERED D-SUB<br />
CONNECTORS<br />
Typical IL Performance of Spectrum Control vs. Alternative Solutions<br />
1000pF Integrated Chip Design<br />
1000pF Thick Film Design<br />
1000pF Chip Filtered (100)<br />
1000pF FT (500)<br />
1000pF FT (700)<br />
1000pF Pi (700)<br />
0<br />
1 10 100<br />
Frequency (MHz)<br />
1000 10000<br />
– = Standard Connector<br />
F = RoHS Compliant Version<br />
PRODUCT SERIES<br />
1 = Series 100 C.O.B.<br />
4 = Series F Ferrite<br />
5 = Series 500 Low Profile<br />
6 = Series 600 High Density<br />
7 = Series 700 High Performance<br />
SHELL SIZE<br />
Series 400,<br />
Series 100 & 500<br />
0 = 9 Contacts<br />
1 = 15 Contacts<br />
2 = 25 Contacts<br />
3 = 37 Contacts<br />
Series 600 High Density<br />
0 = 15 Contacts<br />
1 = 26 Contacts<br />
2 = 44 Contacts<br />
3 = 62 Contacts<br />
4 = 78 Contacts<br />
Series 700<br />
0 = 9 Contacts<br />
1 = 15 Contacts<br />
2 = 25 Contacts<br />
3 = 37 Contacts<br />
4 = 50 Contacts<br />
CONTACT TYPE/TERMINATION<br />
1 = Pin to Solder Cup<br />
2 = Pin to 90º PCB Mount<br />
3 = Socket to Straight PCB Mount<br />
4 = Socket to 90º PCB Mount<br />
5 = Pin-Socket Adapter<br />
6 = Socket to Solder Cup<br />
7 = Pin to Straight PCB Mount<br />
Styles available for:<br />
Series 400 Only 2, 3, 4, 7<br />
Series 100 1 through 7<br />
Series 500 Only 2, 3, 4, 7<br />
Series 600 Only 1, 2, 3, 4, 5<br />
Series 700 1 through 6<br />
Spectrum Control<br />
Series 700 FT and Pi<br />
Filtered D-Subminiature Connector Part Numbering System<br />
56 - 51 3 - 012 - TI<br />
LINE FILTERING<br />
0 = All Positions Same<br />
1 = Special Loading<br />
(Series 600 only)<br />
• Top end<br />
• Superior IL performance<br />
• Higher cost<br />
• Ground plane and die cast shell design provides superior<br />
EMI shielding<br />
CAPACITANCE VALUE<br />
Series 400<br />
01 = Always<br />
Series 100<br />
02 = 100pF<br />
03 = 220pF<br />
04 = 470pF<br />
05 = 820pF<br />
06 = 1500pF<br />
07 = 5600pF<br />
08 = 50pF<br />
09 = 180pF<br />
10 = 1000pF<br />
11 = 2200pF<br />
12 = 47nF<br />
Series 500<br />
10 = 120pF<br />
11 = 440pF<br />
12 = 840pF<br />
13 = 1000pF<br />
14 = 1500pF<br />
Series 600<br />
15 = 85pF FT<br />
16 = 180pF FT<br />
18 = 1000pF FT<br />
19 = 4000pF FT<br />
20 = Insulated Contact<br />
Series 700<br />
See Spectrum Control<br />
Product Specification<br />
OPTIONS<br />
Series 100<br />
_ = .120 Through-hole and 15µ" (.38µm) Gold Plating<br />
3G = 30µ" (.76µm) Gold Plating<br />
5G = 50µ" (1.27µm) Gold Plating<br />
SC and Straight PCBs<br />
TIB = 4-40 Thread on Rear of Flange<br />
TIF = 4-40 Thread on Front of Flange<br />
MIB = M3 Thread on Rear of Flange<br />
GBL6 = For .062" (1.57mm) Boards<br />
JS = Jack Screws<br />
Right Angles and Adapters<br />
_ = No GBL Attached<br />
GL = <strong>Inc</strong>ludes Grounded Board Lock and 4-40 Threads<br />
T = 4-40 Threads<br />
GB = No Board Locks<br />
J = Jack Screws<br />
M = M3 Threads<br />
GF = GL and Jack Screws<br />
Series F<br />
HD = High-Density (15 socket only)<br />
Series 500<br />
TI = 4-40 Threads on Mounting Flange<br />
(.125" hole if not selected)<br />
GBL = Grounded Board Lock <strong>Inc</strong>ludes 4-40 Threads<br />
(available only on 90º PCB)<br />
GBLF = Grounded Board Lock and Ferrite Slab Provides<br />
Enhanced LC Performance<br />
(available only on 90º PCB)<br />
Series 600 High-Density<br />
LI = 4-40 UNC Inserts<br />
S = Solder Dipped Tails<br />
50G = 50µ" (1.27µm) Gold Plating<br />
GBL = Grounded Board Lock<br />
Series 700<br />
LI = 4-40 UNC Inserts<br />
LIM = Metric M3.0 Self-locking Threads<br />
GB = Metal Bracket Provides Ground Connection,<br />
includes 4-40 self-locking threads<br />
(for right angle mount only)<br />
GBL = Grounded board lock (right angle)<br />
GBL6 = For .062" (1.57mm) boards (straight PCB mount)<br />
GBL9 = For .093" (2.36mm) boards (straight PCB mount)<br />
50G = 50µ" (1.27µm) gold plating<br />
S = Solder dipped tails<br />
JS = Jack screw mounting<br />
For option combinations, consult Spectrum Control factory.<br />
Filtered Mini-DIN <strong>Connectors</strong><br />
• Available in several configurations and sizes<br />
• Drop-in replacement, matched footprint<br />
• Available with full metal shields and kinked or straight<br />
ground tabs<br />
• Filtered with ferrites or chip capacitors<br />
• Capacitances of 100pF - 1500pF<br />
• Applications: Audio, Video, and Computer Equipment<br />
1000pF<br />
1000pF<br />
1000pF<br />
45