2002 Replacement Parts Catalog

Recommendations

Info

S/QRC and G-2 BOP Rams Wireline Size (in) Wireline Ram Assembly* (1 required) Wireline Ram Part Numbers (4-1/16” 5000 and 10,000 psi G-2 and 4-1/16” 10,000 and 15,000 psi S/QRC) Upper Ram Body (1 required) Lower Ram Body (1 required) Top Seal (2 required) Wireline Packer (2 required) Wireline Guide (2 required) 0 - 0.250 614263-06 614236-01 614235-01 046950 046941-10 614264-01 0.312 614263-01 614236-01 614235-01 046950 046941-05 614264-01 0.438 614263-02 614236-02 614235-02 046950 046941-06 614264-02 0.562 614263-03 614236-03 614235-03 046950 046941-07 614264-03 0.750 614263-04 614236-04 614235-04 046950 046941-08 614264-04 0.875 614263-05 614236-05 614235-05 046950 046941-09 614264-05 *Wireline ram assembly includes upper and lower wireline rams. **Screw part number: 702507-06-00-06. TC1001 124 © <strong>2002</strong> Cooper Cameron, Cameron Division
D and DL Annular Blowout Preventers In the unique design of the Cameron DL Annular BOP, closing pressure forces the operating piston and pusher plate upward to displace the solid elastomer donut and force the packer to close inward. As the packer closes, interlocking steel reinforcing inserts rotate inward to form a continuous support ring of steel at the top and bottom of the packer. The inserts remain in contact with each other whether the packer is open, closed on pipe, or closed on open hole. Other features of the DL BOP include: • The Cameron DL BOP is shorter in height than comparable annular preventers. • Available in dual configuration in certain sizes. • A quick-release top with a one-piece split lock ring permits quick packer change-out with no loose parts involved. The design also provides visual indication of whether the top is locked or unlocked. • The DL BOP is designed to simplify field maintenance. Components subject to wear are field-replaceable and the entire operating system may be removed in the field for immediate change-out without removing the BOP from the stack. • Twin seals separated by a vented chamber positively isolate the BOP operating system from well bore pressure. High strength polymer bearing rings prevent metal-to-metal contact and reduce wear between all moving parts of the operating systems. • All Cameron DL BOPs are manufactured to comply with NACE specification MR-01-75 for H 2 S service. • Packers for DL BOPs have the capacity to strip pipe as well as close and seal on almost any size or shape object that will fit into the well bore. These packers will also close and seal on open hole. Some annular packers can also be split for installation while pipe is in the hole. Popular sizes of the DL BOP are available with high-performance CAMULAR TM annular packing subassemblies. The Cameron DL BOP is available in sizes from 7-1/16” to 21-1/4” and in working pressures from 2000 to 20,000 psi. TC1001 125 © <strong>2002</strong> Cooper Cameron, Cameron Division
Page 1 and 2:
2002 Replacement Parts Catalog Plea
Page 3 and 4:
Table of Contents Cameron Elastomer
Page 5 and 6:
T BOP Description . . . . . . . . .
Page 7 and 8:
Cameron Elastomer Technology From i
Page 9 and 10:
Comparison of Cameron Ram-Type Blow
Page 11 and 12:
U BOP The Cameron U BOP is the most
Page 13 and 14:
U BOP Specifications The following
Page 15 and 16:
U BOP Double Open Faced Flange or C
Page 17 and 18:
7-1/16” 3000 - 11” 10,000 psi W
Page 19 and 20:
11” 15,000 - 16-3/4” 5000 psi W
Page 21 and 22:
16-3/4” 10,000 - 26-3/4” 3000 p
Page 23 and 24:
Kit Part Numbers BOP Size (in.) Pre
Page 25 and 26:
Tandem Boosters for U BOPs A BOP eq
Page 27 and 28:
UM BOPs The Cameron UM BOP is a lig
Page 29 and 30:
UM BOP Operating Data and Fluid Req
Page 31 and 32:
UM BOP Specifications and Dimension
Page 33 and 34:
UM BOP Specifications and Dimension
Page 35 and 36:
7-1/16” UM BOP Part Numbers Item
Page 37 and 38:
11” UM BOP Part Numbers Item No.
Page 39 and 40:
13-5/8” UM BOP Part Numbers Item
Page 41 and 42:
Tandem Boosters for UM BOPs A BOP e
Page 43 and 44:
U, UL and UM BOP Pipe Rams Pipe ram
Page 45 and 46:
Part Numbers for U, UL & UM BOP Pip
Page 47 and 48:
Hang-Off Weights Hang-off weights a
Page 49 and 50:
H 2 S Shearing Blind Ram U, UL and
Page 51 and 52:
ISR Shearing Blind Ram Interlocking
Page 53 and 54:
U, UL and UM BOP Variable Bore Rams
Page 55 and 56:
Inserted Packers The Cameron Insert
Page 57 and 58:
Hydraulic Bonnet Bolt System The hy
Page 59 and 60:
Bonnet Seal Carriers for U, UM and
Page 61 and 62:
UIIBOP The Cameron U II BOP takes a
Page 63 and 64:
U II BOP Dimensions The following d
Page 65 and 66:
U II BOP Part Numbers Item Number D
Page 67 and 68:
U II BOP Pipe Rams Pipe rams are av
Page 69 and 70:
U II BOP Shearing Blind Rams Camero
Page 71 and 72:
T BOP The Cameron T blowout prevent
Page 73 and 74: OPEN PORT LOCK PORT CLOSE PORT Ram
Page 75 and 76: C D A-3 (Bonnets Closed) A-4 (Bonne
Page 77 and 78: 13-5/8” 10,000 psi WP T BOP Bonne
Page 79 and 80: 18-3/4” 15,000 psi WP T BOP Bonne
Page 81 and 82: TL BOP The Cameron TL BOP product l
Page 83 and 84: TL BOPs with RamLocks BOP Size and
Page 85 and 86: TL BOP Assembly Components Item Qty
Page 87 and 88: TL BOP RamLock Bonnet Subassembly C
Page 89 and 90: TL BOP RamLock Bonnet Subassembly C
Page 91 and 92: TL BOP RamLock Operating Piston Sub
Page 93 and 94: TL BOP RamLock Operating Piston Sub
Page 95 and 96: TL BOP ST-Lock Bonnet Subassembly C
Page 97 and 98: 13 24 Sequencing Valve Subassembly
Page 99 and 100: TL BOP Wedgelock Bonnet Subassembly
Page 101 and 102: TL BOP Manual Locking Screw Compone
Page 103 and 104: TL BOP Tandem Boosters Tandem Boost
Page 105 and 106: T and TL BOP Pipe Ram Part Numbers
Page 107 and 108: T and TL BOP Shearing Blind Rams Ca
Page 109 and 110: T and TL BOP Variable Bore Rams One
Page 111 and 112: C BOP The Cameron C BOP was designe
Page 113 and 114: C BOP Dimensions BOP Size and Worki
Page 115 and 116: 7-1/16” 10,000 psi WP C BOP Part
Page 117 and 118: 13 24 7 Sequencing Valve Subassembl
Page 119 and 120: C BOP Shearing Capability Material
Page 121 and 122: TC1001 121 © 2002 Cooper Cameron,
Page 123: S/QRC and G-2 BOP Rams BOP Descript
Page 127 and 128: D and DL Annular BOP Components Ite
Page 129 and 130: 7-1/16” 3000 - 20,000 psi WP D an
Page 131 and 132: 11” 3000 - 10,000 psi WP D and DL
Page 133 and 134: 13-5/8” 5000 - 16-3/4” 5000 psi
Page 135 and 136: 18-3/4” 5000 - 21-1/4” 2000 psi
Page 137 and 138: DL Annular BOP Replacement Part Kit
Page 139 and 140: Clamp Connections (1-13/16” 10,00
Page 141 and 142: TC1001 141 © 2002 Cooper Cameron,
show all

2002 Replacement Parts Catalog

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?