2002 Replacement Parts Catalog

DL Annular BOP
Replacement Part Kits
For popular size DL BOPs, a BOP replacement parts kit is available to provide all seals, bearings
and scrapers required during normal maintenance.
Kit parts are shrink-film packed to prevent loss and assure long shelf life and are less expensive
than individual parts. All parts in each kit are identified with part numbers and
parts list index numbers.
As an optional replacement for the standard lip seal design, a D-shaped seal is available for
service in annular BOPs that have pitted, corroded or oversized seal grooves. To enhance
the performance life of the used annular BOP, this seal design will fill most voids created
by excessive wear and tear to the seal groove. Seal kits have been created which include all
the operating system seals for the annular BOPs listed below.
Annular BOP Replacement Part Kit Part Numbers
BOP Size Pressure Rating (psi) Replacement Kit “D” Seal Kit
7-1/16” 3000, 5000 049742-01 ---
7-1/16” 10,000 049742-02 ---
7-1/16” 15,000 049742-13 ---
7-1/16” 20,000 049742-03 ---
11” 3000, 5000 049742-09 ---
11” 10,000 049742-10 ---
13-5/8” 5000 049742-11 2010006-01
13-5/8” 10,000 049742-12 2010006-05
16-3/4” 3000, 5000 049742-08 ---
18-3/4” 5000 049742-16 2010006-04
18-3/4” 10,000 049742-17 2010006-03
20-3/4” 3000 049742-18 ---
21-1/4” 2000 049742-18 ---
Higher Temperatures
The DL Annular BOP packing element comes only as a complete subassembly, which includes
packer and donut. Contact your local Cameron representative for details. CAMULAR
part numbers are listed on pages 129-136. Please contact your local Cameron Representative
for severe service packer information.
TC1001 137 © 2002 Cooper Cameron, Cameron Division