Catalogue - Delphi - Global Connection System

Metri-Pack Series
480
S
SEALED
S E A L E D
System Application Information
CABLE RANGE (mm 2 ): ....... 0.50-5.0
Sealed
CURRENT RANGE (AMPS): ........ 0-42
TEMP RANGE O C: ........... -40 to 125
RESISTANCE: ...... <10mΩ@20mV
VOLTAGE DROP: ...... <3.0mV/amp
CENTERLINE SPACING (mm): ...... 9.5
BLADE WIDTH (mm): ................ 4.8
TEMPERATURE RISE ( O C )
TEMPERATURE RISE ABOVE
AMBIENT (25 o C ) VS CURRENT*
100
0.50
80
60
40
20
0.80
1.0
480 Series Terminals – Tin Plated
2.0
3.0
5.0
0
0 10 20 30 40 50
CURRENT (AMPS)
MAXIMUM CURRENT (AMPS)
TEMPERATURE DERATING CURVES*
50
5.0
3.0
40
2.0
1.0
30
0.80
0.50
20
10
0
25 50 75 100 125
AMBIENT TEMPERATURE ( O C )
Metri-Pack Series
*The test data are based on single circuits in free space and were generated using a “Lumped
Resistance” model. This model does not account for all of the variables that would be present in an
actual application. For actual product performance, contact your regional support representative.
CPA
(Connector Position
Assurance)
Male Terminal
Cable Seal
TPA
(Terminal Position
Assurance)
Part # Cable Range (mm 2 ) Material Plating
Sealed Terminals Male 480
Male Connector
12052172 5.0 Tin Brass Tin
12065197 3.0 Tin Brass Tin
12065196 2.0-1.0 Tin Brass Tin
Part # Cavity Inside Diameter Material Color
Plug* Cavity Metri-Pack 480
# Cavities Connector Color Material TPA
Sealed
Male 480
2 12065863 Black PA66 HS IM 12059897
12066082 8.5mm Silicone Green
*Cavity plugs seal unused female and male cavities
SECTION NOTES:
• Due to rigid tolerances of connector cavities, it is critical to
meet all crimp dimensions as specified.
• Female connections for device applications, see page 2.50.
NOTE: Specifications in this catalog are for general reference only and are subject to change without notice. To verify product information, please contact a Delphi representative.
http://connectors.delphi.com 2.47