Catalogue - Delphi - Global Connection System

Tooling
Application Tooling
Delphi Manual Cable Seal
Insertion Block:
This block is a machined piece of aluminum, approximately
1” thick, 6” wide, and 12” long.
There are 80 holes drilled to correspond to the dimensions
of Delphi’s various cable seals.
Seals may be inserted into the block as loose piece or on
mylar tape if desired. This Seal Insertion Block is designed
for lower volume applications.
Weather-Pack 6060 Gauge as a
Process Control Aid:
Specifications:
Weight: 480g (1.05 lb.)
Length: 102mm (4 inches)
Width: 38mm (1-1/2 inches)
Height: 35mm (1-3/8 inches)
This gauge is used as a process aid to verify that terminals
are crimped and mated properly.
NOTE: Specifications in this catalog are for general reference only and are subject to change without notice. To verify product information, please contact a Delphi representative.
http://connectors.delphi.com 10.5
Application Tooling