Catalogue - Delphi - Global Connection System

Tooling
Application Tooling
Delphi Presses:
Delphi offers two bench-style Speed-O-Matic presses.
3-ton used for: Metri-Pack, Weather-Pack, ComPack,
Micro-Pack, and Pack-Con terminals.
5-ton used for:
56/58/59 series terminals and ring
terminals.
Safety Feature:
• An optional single stroke mechanism will
prevent the press from recycling if the
electrical anti-repeat should fail.
Motor Features:
• 1/2 H.P. (5-Ton) or 1/3 H.P. (3-Ton). 115V, 1750
rpm, single phase, 60 cycle.
Presses may be purchased, leased or rented.
Contact your account representative.
Easy
maintenance
Application rate
of up to 4,000
terminals per
hour
Safety
guard
Proven press
in the
connection
systems
industry
Rugged
Factory life of over
40 years
Optional
heavy-duty
stand
The press of choice
for Delphi
Delphi Speed-O-Matic Dies:
Application Tooling
Delphi Speed-O-Matic dies used together with our Speed-O-
Matic 3-Ton or 5-Ton press will allow a maximum application
rate of up to 4,000 terminals per hour. Speed-O-Matic dies
can be set up to run a variety of applications.
Therefore, when ordering an applicator die, please provide
Delphi with the following information:
• Terminal part number
• Gauge of cable to be crimped
• Type of cable insulation
Speed-O-Matic dies may be purchased, and certain dies
are also available for rental or lease. Contact your account
representative.
Please see cross-reference sheet for terminal-to-die
information. See Page 10.14.
NOTE: Specifications in this catalog are for general reference only and are subject to change without notice. To verify product information, please contact a Delphi representative.
10.2
Factory life of over
40 years
Application rate of up to
4,000 terminals per hour
http://connectors.delphi.com
Heavy-duty