Catalogue - Delphi - Global Connection System

Tooling
Application Tooling
Delphi Flex-Guard Conduit Cutter:
This versatile machine is designed for use both as a
production line machine and for bulk conduit cutting
operations.
For production line operations:
• With machine modifications, will cut up to
three different lengths of conduit in any
pre-determined sequence.
For bulk cutting operations:
Cuts various
lengths
Versatile
Easy to operate
• Will cut as many as 99,999 pieces of conduit
of the same length in one continuous
operation.
This cutter requires both electrical and pneumatic
connections.
Specifications:
Overall height:
Overall width:
Overall depth:
1854mm (73 inches)
787mm (31 inches)
330mm (13 inches)
Power Requirements:
Electrical-440 volt, 60 cycle AC, 110 volt may
be requested.
No progression
adjustment
Delphi Automatic Cable Seal Applicator:
This tool is designed to automatically apply cable seals from
a continuous mylar carrier strip onto unstripped cable. Cable
may range in size from 0.22mm 2 gauge (thin wall) to 5.0mm 2
gauge (heavy wall).
This applicator is designed for use on automatic cable
processing equipment.
Quick change
tooling
Efficient
Application Tooling
NOTE: Specifications in this catalog are for general reference only and are subject to change without notice. To verify product information, please contact a Delphi representative.
10.4
http://connectors.delphi.com