Catalogue - Delphi - Global Connection System

Metri-Pack Series
280 Header
U
UNSEALED
U N S E A L E D
CABLE RANGE (mm 2 ): ......
Unsealed System Application Information
0.35-5.0
CURRENT RANGE (AMPS): ....... 0-30
TEMP RANGE O C: .......... -40 to 125
RESISTANCE: ...... <10mΩ@20mV
VOLTAGE DROP: ..... <3.0mV/amp
CENTERLINE SPACING (mm): ...... 6.9
BLADE WIDTH (mm): ................ 2.8
TEMPERATURE RISE ( O C)
280 Series Terminals – Tin Plated
TEMPERATURE RISE ABOVE
AMBIENT (25 o C ) VS CURRENT*
100
80
60
0.50
0.80
1.0
2.0
3.0
40
20
5.0
0
0 10 20 30 40 50
CURRENT (AMPS)
*The test data are based on single circuits in free space and were generated using a “Lumped
Resistance” model. This model does not account for all of the variables that would be present in an
actual application. For actual product performance, contact your regional support representative.
MAXIMUM CURRENT (AMPS)
TEMPERATURE DERATING CURVES*
50
5.0
3.0
40
2.0
1.0
30
0.80
0.50
20
10
0
25 50 75 100 125
AMBIENT TEMPERATURE ( O C )
Metri-Pack Series
Male Header
Connector Assembly
Pins Connector Color Material
Unsealed Assembly Connector
Metri-Pack Male Header
4 12110440 Black PA66 HS IM
280
Pins Connector Color Material
Unsealed Assembly Connector
Metri-Pack Male Header
8 12146724 Gray PBT 30% GF
280
SECTION NOTES:
• Due to rigid tolerances of connector cavities, it is critical to
meet all crimp dimensions as specified.
NOTE: Specifications in this catalog are for general reference only and are subject to change without notice. To verify product information, please contact a Delphi representative.
http://connectors.delphi.com 2.105