Catalogue - Delphi - Global Connection System

Ducon Series
2.8
S
SEALED
S E A L E D
CABLE RANGE (mm 2 ): ......... 0.5-2.5
CURRENT RANGE (AMPS): ........... 33
TEMP RANGE O C: ........... -40 to 135
RESISTANCE: ...... <10mΩ@20mV
VOLTAGE DROP: ...... <4.0mV/amp
CENTERLINE SPACING (mm): ...... 6.0
BLADE WIDTH (mm): ................ 2.8
System Application Information
105
Sealed
TEMPERATURE RISE ( O C)
2.8 Series Terminals – Tin Plated
TEMPERATURE RISE ABOVE
AMBIENT (25 o C ) VS CURRENT*
1.0
90
75
0.75
60
0.5
45
30
1.5 2.5
15
0
0 10 20 30 40
CURRENT (AMPS)
MAXIMUM CURRENT (AMPS)
TEMPERATURE DERATING CURVES*
50
2.5
40
1.5
1.0
30
20
10
0.75
0.5
0
25 50 75 100 125 150
AMBIENT TEMPERATURE ( O C )
*The test data are based on single circuits in free space and were generated using a “Lumped
Resistance” model. This model does not account for all of the variables that would be present in an
actual application. For actual product performance, contact your regional support representative.
TPA
(Terminal Position
Assurance)
Cable Seal
Ducon Series
Male Terminal
Optional Conduit
TPA Cap
Male Connector
# Cavities Connector Color Material TPA
Sealed
Male 2.8
Part # Cable Range (mm 2 ) Material Plating
Sealed Terminals Male 2.8
6 12185126 Gray PA6 12185000
Optional TPA Cap Black PA6 10717815
Conduit
12185129 1.5-0.5 Copper Nickel Silicon Alloy Tin
12185237 2.5-1.5 Copper Nickel Silicon Alloy Tin
Part # Cavity Inside Dia. Material Color
Plugs* Cavity Ducon 2.8
SECTION NOTES:
• Ducon Connection Systems have been validated using DIN
Cable Standards.
15337197 5.2mm Silicone White
10730124 5.2mm Silicone Green
*Cavity plugs seal unused female and male cavities.
NOTE: Specifications in this catalog are for general reference only and are subject to change without notice. To verify product information, please contact a Delphi representative.
http://connectors.delphi.com 5.11