Catalogue - Delphi - Global Connection System

Metri-Pack Series
480
U
UNSEALED
U N S E A L E D
System Application Information
CABLE RANGE (mm 2 ): ....... 0.35-5.0
Unsealed
CURRENT RANGE (AMPS): ........ 0-42
TEMP RANGE O C: ........... -40 to 125
RESISTANCE: ...... <10mΩ@20mV
VOLTAGE DROP: ...... <3.0mV/amp
CENTERLINE SPACING (mm): ...... 6.9
BLADE WIDTH (mm): ................ 4.8
TEMPERATURE RISE ( O C )
480 Series Terminals – Tin Plated
TEMPERATURE RISE ABOVE
AMBIENT (25 o C ) VS CURRENT*
100
0.50
80
0.80
2.0
60
1.0
3.0
40
5.0
20
0
0 10 20 30 40 50
CURRENT (AMPS)
MAXIMUM CURRENT (AMPS)
TEMPERATURE DERATING CURVES*
50
5.0
3.0
40
2.0
1.0
30
0.80
0.50
20
10
0
25 50 75 100 125
AMBIENT TEMPERATURE ( O C )
Metri-Pack Series
*The test data are based on single circuits in free space and were generated using a “Lumped
Resistance” model. This model does not account for all of the variables that would be present in an
actual application. For actual product performance, contact your regional support representative.
Male Terminal
TPA
(Terminal Position
Assurance)
Male Connector
Part # Cable Range (mm 2 ) Material Plating
Unsealed Terminals Male 480
# Cavities Color Material TPA
Unsealed Connectors Male 480
1 12015987 Md. Gray PA66 HS IM –
2 12064750 Black PA66 HS IM 12064751
12033820 5.0-3.0 Tin Brass Tin over Copper
12052827 3.0 Tin Brass Tin over Copper
12020120 2.0-1.0 Tin Brass Tin over Copper
12020119 0.80-0.50 Tin Brass Tin over Copper
12066269 0.50-0.35 Tin Brass Tin over Copper
12020784 0.35 (2 Req’d.) Tin Brass Tin over Copper
SECTION NOTES:
• Due to rigid tolerances of connector cavities, it is critical to
meet all crimp dimensions as specified.
• Female connections for device applications, see page 2.49.
NOTE: Specifications in this catalog are for general reference only and are subject to change without notice. To verify product information, please contact a Delphi representative.
http://connectors.delphi.com 2.43