Catalogue - Delphi - Global Connection System

GT Series
150
Second Line !!!!!!!!!!!!!!!!
U
UNSEALED
U N S E A L E D
GT Series
GT 150 Series Terminals – Tin Plated
Information Application System Unsealed
CABLE RANGE (mm 2 ): ....... 0.35-1.0
CURRENT RANGE (AMPS): ........ 0-15
TEMP RANGE O C: ........... -40 to 125
RESISTANCE: ...... <10mΩ@20mV
VOLTAGE DROP: .... <10.0mV/amp
CENTERLINE SPACING (mm): ...... 4.0
BLADE WIDTH (mm): ................. 1.5
TEMPERATURE RISE ( O C)
TEMPERATURE RISE ABOVE
AMBIENT (25 o C ) VS CURRENT*
100
80
60
40
20
1.0
0.80
0.50
0
0 5 10 15 20
CURRENT (AMPS)
MAXIMUM CURRENT (AMPS)
TEMPERATURE DERATING CURVES*
20
1.0
0.80
15
0.50
10
5
0
25 50 75 100 125
AMBIENT TEMPERATURE ( O C )
*The test data are based on single circuits in free space and were generated using a “Lumped Resistance”
model. This model does not account for all of the variables that would be present in an actual application.
For actual product performance, contact your regional support representative.
Male Terminal
Side Lock Cover
(SLC)
Male Connector Assembly
# Cavities Connector Color Material
Unsealed Assemblies Connector Male 150 GT
2 15332130 Black PA6 10% GF & 20% GB
3 15332133 Black PA6 10% GF & 20% GB
4 15332136 Black PA6 10% GF & 20% GB
5 15332139 Black PA6 10% GF & 20% GB
6 15332142 Black PA6 10% GF & 20% GB
8 13521474 Black PBT 20% GF
10 15459917 Black PBT 20% GF
12 15459913 Black PBT 20% GF
14 13521478 Black PBT 20% GF
16 13516907 Black PBT 20% GF
Side Lock Covers (SLC) are included in the Connector Assemblies listed
in this section.
15304701 0.50-0.35 Tin Brass Tin
15304702 1.00-0.75 Tin Brass Tin
SECTION NOTES:
• Due to rigid tolerances of connector cavities, it is critical
to meet all crimp dimensions as specified.
Part # Cable Range (mm 2 ) Material Plating
Unsealed Terminals Male 150 GT
NOTE: Specifications in this catalog are for general reference only and are subject to change without notice. To verify product information, please contact a Delphi representative.
http://connectors.delphi.com 1.3