Catalogue - Delphi - Global Connection System

GT Series
Lever Lock
S
SEALED
S E A L E D
GT Series
TEMPERATURE RISE ( O C)
GT 150 Series Terminals – Tin Plated
TEMPERATURE RISE ABOVE
AMBIENT (25 o C ) VS CURRENT*
100
80
0.50
60
0.80
40
1.0
20
0
0 5 10 15 20
CURRENT (AMPS)
MAXIMUM CURRENT (AMPS)
TEMPERATURE DERATING CURVES*
20
1.0
0.80
15
0.50
10
5
0
25 50 75 100 125
AMBIENT TEMPERATURE ( O C )
TEMPERATURE RISE ABOVE
Information Application System Sealed
TEMPERATURE RISE ( O C)
280 Series Terminals – Tin Plated
AMBIENT (25 o C) VS CURRENT*
100
0.50
80
0.80
2.0
60
1.0
3.0
40
5.0
20
0
0 10 20 30 40 50
CURRENT (AMPS)
MAXIMUM CURRENT (AMPS)
TEMPERATURE DERATING CURVES*
50
5.0
3.0
40
2.0
1.0
30
0.80
20
0.50
10
0
25 50 75 100 125
AMBIENT TEMPERATURE ( O C )
CABLE RANGE (mm 2 ): ...... 0.35-1.0
CURRENT RANGE (AMPS): ....... 0-15
TEMP RANGE O C: .......... -40 to 125
RESISTANCE: ...... <10mΩ@20mV
VOLTAGE DROP: ... <10.0mV/amp
CENTERLINE SPACING (mm): ...... 4.5
BLADE WIDTH (mm): ................ 1.5
CABLE RANGE (mm 2 ): ...... 0.35-5.0
CURRENT RANGE (AMPS): ....... 0-25
TEMP RANGE O C: ......... -40 to 125
RESISTANCE: ...... <10mΩ@20mV
VOLTAGE DROP: ..... <4.0mV/amp
CENTERLINE SPACING (mm): ...... 6.5
BLADE WIDTH (mm): ................ 2.8
* The test data are based on single circuits in free space and were generated using a “Lumped Resistance” model. This model does not account for all of the variables
that would be present in an actual application. For actual product performance, contact your regional support representative.
Cable Seals
Part # Cable Range (mm 2 ) Material Plating
Sealed Terminals Male 150 GT
Male Terminals
15326268 0.50-0.35 Tin Brass Tin
15326269 1.00-0.75 Tin Brass Tin
Male Connector
(PLR)
Primary Lock
Reinforcement
280 Male Terminals Sealed GT
Part # Part # Cable Material Plating
Dia. 5.2 (mm) Dia. 5.8 (mm) Range (mm 2 )
15304727 15304730 0.50-0.35 Tin Brass Tin
15304728 15304731 1.00-0.75 Tin Brass Tin
– 15304732 3.00-1.50 Tin Brass Tin
15304729 – 2.00-1.50 Tin Brass Tin
SECTION NOTES:
• Due to rigid tolerances of connector cavities, it is critical to
meet all crimp dimensions as specified.
Part # Cavity Diameter Material Color
Plug*
150 GT
15305171 4.0mm Silicone Green
*Cavity plugs seal unused female and male cavities.
# Cavities Connector Color Material PLR TPA Stabilizer
Sealed Connectors Lock Lever Male GT
Part # Cavity Diameter Material Color
Plug*
280 GT
24 15336173 Black PA66 HS IM 14% GF 15373421 – –
38 15317380 Black PA66 HS IM – 15304903 15488824
12059168 5.2mm Silicone Dk. Red
15305170 5.8mm Silicone White
*Cavity plugs seal unused female and male cavities.
NOTE: Specifications in this catalog are for general reference only and are subject to change without notice. To verify product information, please contact a Delphi representative.
http://connectors.delphi.com 1.39