Innovativ and efficient - SCHÄFER IT Rack Solutions

Flexible modules: fully assembled, variable and exchangeable, easy to extend.
Top cover panel with brush strip for
easy cable entry
Load bearing capacity of 19“ mounting planes
Brush strip and fans can be retrofitted
optionally
With 2 depth stays (per side) max. 500 kg
With 3 depth stays (per side) max. 700 kg
With 4 depth stays (per side) max. 1000 kg
With 4 cross supports max. 400 kg
With 1 additional depth stay (per side) max. 700 kg
With additional rectangular tube (per plane) max. 1000 kg
With 4 corner brackets (per side) max. 700 kg
With 2 bridges (front/back) max. 1000 kg
Complete accessories:
Clearly allocated and packaged ready to be installed
n Especially for upgrading or extension of the SP Rack
n General accessories for interior fitting, power supply etc.
Passively vented top cover panel
provides mechanical protection combined
with passive rack ventilation
The removable side panels are slotted
into place, screwed fastened (quickfastening
system) and secured by a
lock. They can also be left in place to
serve as partitioning walls in baying
solutions
Useable internal dimensions between
frame sections:
n 491 mm on racks with widths of 600 mm
n 591 mm on racks with widths of 700 mm
n 691 mm on racks with widths of 800 mm
External dimensions (without SW)
n 593 mm on racks with widths of 600 mm
n 693 mm on racks with widths of 700 mm
n 793 mm on racks with widths of 800 mm
The SP Rack consists of steel frame sections
joined together by means of corner connectors.
Dismantling can be carried out in a few simple
moves, allowing the rack to be erected in any
room without any difficulty
Top cover panel with active fans and
brush strip provide optimum rack
ventilation while minimising noise
emissions
Professional reliability and attractive design
Front and back doors are equipped
with pivoted handles and security
lock, or can be exchanged for a profile
half-cylinder or any other standard
locking system on request
13