Innovativ and efficient - SCHÄFER IT Rack Solutions
Innovativ and efficient - SCHÄFER IT Rack Solutions
Innovativ and efficient - SCHÄFER IT Rack Solutions
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
III. NT Box<br />
Wall Mounting Enclosures<br />
Economical <strong>and</strong> easy to assemble<br />
n High-grade steel housing (light grey<br />
RAL 7035) complete with basic equipment<br />
n Optimum accessibility for fast installation:<br />
once the door is open, the side panels can<br />
be pulled forward<br />
n Mounted ready for installation, glazed door<br />
at front, inc. lock, 482.6 mm (19“) mounting<br />
angles at front, cable entry apertures in top<br />
<strong>and</strong> bottom <strong>and</strong> cable management rails<br />
n Individual units in separate transport<br />
packaging<br />
n Depths of 400, 500 <strong>and</strong> 600 mm,<br />
from 6 – 21 U<br />
The wall-mounted NT Box was specially developed<br />
for small networks, sub-distributors <strong>and</strong><br />
floor distributors.<br />
The major practical problem of accessibility is<br />
solved by the fact that the door can be very<br />
quickly removed once opened, allowing the<br />
side panels to be slid out forwards.<br />
This way, the housing is easily accessible from<br />
three sides <strong>and</strong> allows all components to be<br />
installed easily.<br />
To change the doors from left to right-h<strong>and</strong><br />
opening, simply lift out the hinge pin <strong>and</strong><br />
42<br />
NT Box<br />
replace them in the fixings provided.<br />
Cable entry apertures with brush strips are<br />
fitted in the top <strong>and</strong> bottom panels <strong>and</strong>/<br />
or rear panel <strong>and</strong> can be replaced by flange<br />
plates on request. The side panels are passively<br />
ventilated.<br />
The NT Box is available in 18 different sizes. The<br />
integrated 482.6 mm (19“) mounting angles<br />
can be installed either at the front or rear <strong>and</strong><br />
are depth adjustable.<br />
All NT Boxes <strong>and</strong> the provided accessories<br />
follow the plug & play principle.<br />
All NT Boxes can also be placed on the floor,<br />
whether they are fitted with feet or not.<br />
Material:<br />
n Framework: 1.25 mm steel sheet<br />
n Door: 4 mm single pane safety glass panel<br />
n Side panels: 0.75 mm steel sheet<br />
n 482.6 mm (19“) mounting angles:<br />
1.5 mm steel sheet<br />
Finish:<br />
n Framework, side panels: powder coated in<br />
RAL 7035 light grey<br />
n Galvanised 482.6 mm (19“) mounting<br />
angles<br />
Locking:<br />
n Security lock (st<strong>and</strong>ard)<br />
H<strong>and</strong>le for a profile half cylinder<br />
(optional, see page 84)<br />
Cable entry:<br />
n Depth: 35 mm, length: 400 mm<br />
Delivery comprises:<br />
n 1 framework housing with 2 brush strips<br />
n 1 door with lock <strong>and</strong> hinge mounting<br />
brackets<br />
n 2 side panels with passive ventilation<br />
n 2 x 482. mm (19“) mounting angles, front<br />
n 1 cable support rail<br />
n Earthing kit, supplied<br />
Load-bearing capacity:<br />
n NT Boxes have a load bearing capacity of<br />
3 kg per height unit<br />
Useable internal space:<br />
n Box depth minus 55 mm<br />
Cable entry dimensions (D x W):<br />
n 90 x 400 mm<br />
Light grey RAL 7035