Innovativ and efficient - SCHÄFER IT Rack Solutions

VI. System Accessories
NT Boxes
84
Handle for profile half cylinder
Handle for profile half cylinder
Delivery comprises:
1 handle (RAL 9005),
fixing accessories without cylinder
Delivery comprises: The handle can be retrofitted to every
Box.
Hole diameter 22 mm
Mounting kit for wall-mounting Mounting kit Order no.
For mounting NT Boxes on walls
Delivery comprises:
4 screws DIN 571
4 washers
4 wall plugs
4 wall spacers (clearance 13 mm)
7100900
Feet Feet Order no.
For mounting underneath the NT Boxes
Delivery comprises:
4 rubber feet
4 self-tapping screws
7110500
Flange plate, solid
As an optional extra, the solid flange plate can be used to
cover the brush strip apertures.
Material: 1.5 mm sheet steel
Finish: powder coated in RAL 7035
Delivery comprises: 1 flange plate, fixing accessories
See also general system accessories from page 88
Handle for profile half cylinder Order no.
7100010
Flange plate, solid Order no.
7100800
Flange plate with active fans Flange plate with fans Order no.
The flange plate with active fans can be installed in place
7100700
of the brush strip, if required.
Deliver comprises: 1 flange plate with two active fans,
fixing accessories
Technical Data:
n Air-volume flow rate per fan (free blowing): 50/60 m³/h
n Operating voltage: 230 V 50/60 Hz
n Power consumption: 14.5/14 W
n Noise level: 35 dB(A)
schuko C 13 mains cable 6763200