Innovativ and efficient - SCHÄFER IT Rack Solutions

VI. System Accessories
General Accessories
Cable routing tile for raised floors Cable routing tile Order no.
Cable routing tile as a seal for installation in the raised floor,
for raised floors
in two parts.
Usable cable aperture: 203 x 102 mm
Dimensions: (L x W x H) 279 x 210 x 41 mm
Material: plastic
Delivery comprises: Cable routing tile, 2-part
7963800
94
Chassis rails (depth adjustable)
Cable clips
Equipotential earthing bar
The slide rails can be extended to the required length and
screwed into place between the front and rear 482.6 mm
(19“) mounting angles. The component for installation is
pushed onto the rails and fixed into place. Can be used
in racks of all manufacturers! Use of lower height units is
limited (-2 mm).
Length: min. 540 mm, max. 750 mm
Load capacity: 100 kg
Contact area: 28 mm right/left
Material: steel sheet, galvanised
Delivery comprises: 2 slide rails, fixing accessories
For attachment to C-profile rails to enable the clamping
and guiding of cables by means of cable ties.
Material: PA
Delivery comprises 4 clips
For retrofitting horizontally or vertically in the framework‘s
25 mm pitch pattern.
Material: 12 x 5 mm copper rail
1 equipotential earthing bar, 2 isolators, 5 feeder terminals
1.5 – 16 mm², fixing accessories
Chassis rails (depth adjustable) Order no.
7777200
Cable clip Order no.
7760000
Horizontal installation for Order no.
rack width (mm)
600 7760200
800 7760100
Additional feeder terminals Order no.
UPP = 10 7765000
Vertical installation for
rack height (mm)
Order no.
2000 7760300
Central earthing point Order no.
6760100