Innovativ and efficient - SCHÄFER IT Rack Solutions

VI. System Accessories
IT Enclosures
86
Shelf (not 482.6 mm (19”)), pull-out (standard only)
Shelf, fixed installation
Shelf, fixed (for PC case basic/comfort)
Shelf, pull-out (for PC case fokus)
The pull-out shelves are mounted with the telescopic rails
directly onto the framework in the 25 mm pitch pattern.
Dimensions: width 466 mm, depth 600 mm
Material: 1.25 mm sheet steel
Finish: powder coated in RAL 7035 light grey
Static load capacity: 50 kg
Delivery comprises: 1 shelf, 2 telescopic rails,
fixing accessories
Depending on the rack dimensions, the shelves are fixed
to the IT Enclosure directly using the depth stays, which
must be ordered separately (see page 77).
Static load bearing capacity: 75 kg
Delivery comprises: 1 shelf
Rack trolley, galvanised (for PC case basic/comfort)
Can be retrofitted on IT Enclosures, with castors or
levelling feet.
Material: 2.00 mm steel sheet
Finish: galvanised
Static load bearing capacity: 200 kg
Delivery comprises: 1 rack trolley
The shelf is attached to the 25 mm pitch pattern by means
of mounting hooks.
Height can be varied as required.
Dimensions: width 635 mm, depth 500 mm
Material: 1.00 mm steel sheet
Finish: galvanised
Static load: 40 kg
Delivery comprises: 1 shelf, 4 mounting hooks
The pull-out shelf is mounted on shelf supports and
telescopic rails and fixed directly onto the framework
mounting holes.
The shelf is height adjustable in a 50 mm pitch pattern.
Dimensions: width 493 mm, depth 500 mm
Material: 1.50 mm sheet steel
Finish: powder coated in silver grey
Static load capacity: 50 kg
Delivery comprises: 1 shelf, 2 shelf supports,
2 telescopic rails, fixing accessories
See also general system accessories from page 88
Shelf, pull-out Order no.
6749500
Shelf, fixed installation Order no.
6745500
Rack trolley, galvanised Order no.
with castors 7530800
with levelling feet 7530900
Shelf, fixed Order no.
7471500
Shelf, pull-out Order no.
7474500