Innovativ and efficient - SCHÄFER IT Rack Solutions

C-profile rails
Earthing kit
Cable support rails enable the structured clamping and
strain relief of cables routed along the width and depth of
the rack by means of cable clamps and/or fasteners. The
rails are mounted at various depths in the rack between
the vertical profiles.
Material: 1.50 mm sheet steel
Finish: galvanised
Delivery comprises: 2 cable clamping rails, fixing
accessories
Supplementary cable clips available for clamping
and guiding cable ties (see page 92)
Used for the appropriate earthing of all system components,
like side panels, doors, modules, etc. which are
attached to the framework.
Cable length: 4 x 240 mm, 4 x 150 mm
Wire cross section: 6 mm 2
Delivery comprises: 1 earthing kit, fixing accessories
Rack width Rack depth Order no.
(mm) (mm)
600 6761500
800 6961500
600 6762500
800 6962500
900 6959500
1000 6960500
1200 6960510
Earthing kit Order no.
7790000
Air Tube Switch Air Tube Switch Bestell-Nr.
The Air Tube Switch enables the supply of cold air to
be targeted to the side of the switch for a maximum effect
of the offered cold air (TCO). The switch can be mounted at
the front or rear of 800 mm wide racks 19” planes.
Use of the Air Tube Switch means that several switches
can be mounted in rows without any mutual thermal
influence. Air Tube Switch can be supplied for many
different switch types on request.
on request
81