Innovativ and efficient - SCHÄFER IT Rack Solutions

18
I. SP Rack Smart Profile
State-of-the-art rack solutions for all
standard server and network components
– even for combinations of components
from different manufacturers
n Maximum assembly range: 900 mm deep,
600 mm wide
n Maximum security: slot-in side panels with
lock, doors with swinghandle and lock
n Optimum ventilation (active or passive)
n Simple to assemble and disassemble –
all racks are „demountable“
n Mobile on rollers or with plinth
n 100 % modular system, can be extended at
any time
n In light grey RAL 7035 or black RAL 9005,
inc. accessories in black
n Extremely strong frame with load bearing
capacity of up to 1000 kg; higher load
bearing capacities available on request
SP Complete Server Racks
SP20 Rack – The server rack
solution for depths
of 900 mm
Dimensions:
n Width: 600 mm
n Height without rollers: 1200 mm and
2000 mm
n Height with rack rollers: 1240 mm and
2040 mm
n Height with plinth: 1300 mm and
2100 mm
n Depth: 900 mm
Material:
n Basic frame: 2.00 mm steel sheet,
multi-profiled
n Doors: 1.25 mm steel sheet with multi-folded
edges and 3 mm single pane safety glass
panel (front door only)
n Side panels: 1.00 mm steel sheet
n Plinth: 1.25 mm steel sheet
n Top/bottom cover panels:
1.25 mm steel sheet
n 482.6 mm (19“) mounting angles:
2.00 mm steel sheet
Finish:
n Basic frame, doors, side panels, modules:
high-quality powder coating in light grey
RAL 7035 or black RAL 9005
n 482.6 mm (19“) mounting angles:
galvanised
Locking:
n Doors: standard swinghandle with
security lock or other standard lock,
2-point locking system
n Side panels: sash fastener with safety lock,
additionally screw fastened
International standards:
n IEC 297-1/2 482.6 mm (19“)
n IEC 917-2-1 (metric)