motion-control-drives-D31-5-complete-English-2020-03-Update-2020-08

© Siemens 2020
SINAMICS G120X infrastructure converters for HVAC/Water/Wastewater
0.75 kW to 630 kW (1 hp to 700 hp)
Supplementary system components > SINAMICS G120X I/O Extension Module
2
■ Overview
SINAMICS G120X I/O Extension Module
The SINAMICS G120X I/O Extension Module increases the number
of I/O terminals of the converter and therefore allows for
additional converter control functionalities. It also allows for the
connection to an operator panel or the SINAMICS G120 Smart
Access.
The optional SINAMICS G120X I/O Extension Module has 2 DI,
2 AO, 4 DO (relay), and up to 2 Pt1000/Ni1000 temperature
sensors can be directly connected.
Notes:
The SINAMICS G120X I/O Extension Module is only supported
for SINAMICS G120X converters with FS codes 02 02 (FSA to
FSG) / 02 (FSH and FSJ) and firmware V1.01.
The FS code can be found on the rating plate of the converter.
■ Selection and ordering data
Description
SINAMICS G120X I/O Extension
Module
for the direct connection of
Pt1000/Ni1000 temperature sensors
NEW NEU
Article No.
6SL3255-0BE00-0AA0
■ More information
Further information and documentation is available on the
Internet at:
www.siemens.com/sinamics-g120x/documentation
■ Technical specifications
Article No.
6SL3255-0BE00-0AA0
Analog inputs
Number of analog inputs 2
Design of the sensor to detect the
ambient temperature connectable
Connectable conductor cross-section at
the analog input
AWG number as coded connectable
conductor cross-section at the analog
input
Input current
Analog outputs
2 analog inputs for connecting temperature
sensors Pt1000/Ni1000.
One of them can be used as an
analog input.
0.5 ... 1.5 mm²
21 ... 16
0...20mA
Number of analog outputs 2
Analog outputs Type
Non-isolated output
Connectable conductor cross-section at 0.5 ... 1.5 mm²
the analog output
AWG number as coded connectable 21 ... 16
conductor cross-section at the analog
output
Output voltage at analog output 0...10V
Output current at analog output 0...20mA
Digital inputs
Number of digital inputs 2
Connectable conductor cross-section at 0.5 ... 1.5 mm²
the digital inputs
AWG number as coded connectable 21 ... 16
conductor cross-section at the digital
inputs
Digital inputs Input voltage for signal
"0" "1"
Digital inputs Input voltage for signal
"1" "0"
Input voltage at digital input maximum
Digital outputs
11 V
5V
30 V
Number of digital outputs 4
Connectable conductor cross-section at 1.5 mm²
the digital outputs maximum
AWG number as coded connectable 16
conductor cross section at the digital
outputs maximum
Output current at digital output
Mechanical data
Width
Depth
Height
2A
71 mm
27 mm
117 mm
2/60 Siemens D 31.5 · March 2020
Update 08/2020