CAT-NADNL22EN - Linear Guide Systems

More documents

Recommendations

Info

C-LINE PRODUCT DESCRIPTION KEY BENEFITS • High balance of mounting surface errors and misalignment • Guide rollers for fixed and floating bearing constructions • Easy smooth running • High speeds up to 8 m/s • Integrated lubricating system With the new C-Line family, NADELLA aims to offer a complete product line: the NT guides, available in 2 sizes and the LS guide, available in one size; the guide rollers, also available in floating version cursors with 3, 4, 5 and 6 rollers already available in stock. The cold drawn rails have a C shape and the internal raceways are induction hardened. The guide rollers slide inside the rails, in this way, they are protected from any accidental impacts. The guides are zinc-plated as standard and can also be supplied nickel-plated for more aggressive environments. The use of floating guide rollers, coupled with “fixed” rollers, allows to obtain a self-aligning system, able to balance possible axial or transversal misalignment errors between two parallel guides. NADELLA has the advantage of using a single driving profile for both types of rollers. The C-line is available in three sizes and the guide rollers can be both centred and eccentric to allow adjustment of the play. ESSENTIAL TECHNICAL FEATURES • Steel rail, drawn, induction hardened • Zinc-plated rail, alternatively with nickel-plated surface • Rollers for fixed and floating bearing constructions • High balance of mounting surface errors and misalignment • High performance and rugged • Rollers lubricated for life • Dust resistant • Easy fitting • Easy smooth running • High speeds up to 8 m/s (depending on roller size and application) • Acceleration up to 20 m/s² • Working temperatures up to 80°C possible • Pitch of rail borings standard or according to customer drawings • Integrated lubricating system at the front sides of the carriage CARRIAGE CONFIGURATION: CARRIAGES WITH CENTRAL BLOCK IN STEEL RT, RTL, RTY AND ANODISED ALUMINIUM RCS, RAS, RYS. The load capacity of the carriage shown in the following paragraphs refer to the following mounting configuration, where the guide rollers dashed lines represent the concentric guide rollers ( ), while the eccentric rollers which allow the adjustment of the play, do not exhibit hatch ( ). The position of the eccentric rollers on the RT, RTL, RTY carriages is highlighted by a round marker (o) CARRIAGE WITH 3 ROLLERS Type C3 … CARRIAGE WITH 4 ROLLERS Type C4 … A Type C4 … B CARRIAGE WITH 5 ROLLERS Type C5 … CARRIAGE WITH 6 ROLLERS Type C6...A Type C6...B 80 |
5 4 3 2 1 D 6.1 MAXIMUM LOAD CAPACITY OF SINGLE CARRIAGE DYNAMIC LOAD CAPACITY OF SINGLE CARRIAGE The tables below show the dynamic load capacity that allows a nominal life of 100 km. C The nominal life of the carriage can be calculated using the following formula: L 10 = (Ci / Pi) 3 x 100 km Where Ci and Pi are: the allowed dynamic loads (Ci) and the external loads (Pi) acting on the carriage in a particular direction of load (i). B 5 The load capacity charts must be considered when loads act exclusively in a single load direction (only along the Y axis or only along the Z axis). In case of combined loads the maximum load allowed will have lower values. The tables below show the values of maximum loads applicable on a single carriage in relation to the axis system shown. CARRIAGE WITH 3, 4, 5 AND 6 WHEELS TYPE RT, RTL AND RTY Guide Carriage Fy 1) NT 28 NT 43 4 C3 RT 28 88 C4 RT 28 115 A C4 RT 28 115 B C5 RT 28 140 C6 RT 28 170 A C6 RT 28 170 B C3 RT 43 134 C4 RT 43 175 A C4 RT 43 175 B C5 RT 43 215 A C6 RT 43 258 A C6 RT 43 258 B (N) 2180 1635 1635 2725 2453 2453 5360 4020 4020 6700 6030 6030 Fz 2) (N) 640 960 960 1280 1440 1440 1570 2198 2198 3140 3297 3297 Mx 3) (Nm) 6 9 9 12 13 13 21 31 31 42 47 47 My 2) (Nm) 16 37 37 42 55 55 61 119 119 149 179 179 1) Fy directed to load the concentric wheels, valid for carriages type RT, RTL and RTY 2) For carriages type RTY the load is reduced by 50%; load equal to ZERO for carriages type RTL 3) Mx equal to ZERO on carriage type RTL and RTY 4) Mz valid for carriages type RT, RTL and RTY CARRIAGE WITH 3 ROLLERS TYPE RCS, RAS AND RYS Guide Carriage Fy 5) (N) Fz 6) (N) Progettato da Controllato da Approvato da Data Data AL 05/07/2022 3 Mx 7) (Nm) My 6) (Nm) Mz 4) (Nm) Mzl 27 57 113 85 85 170 105 204 407 306 306 611 2 Mzr 27 113 57 85 170 85 105 407 204 306 611 306 Mz 8) (Nm) LS 63 C3 RCS 63 226 13000 4400 81 264 390 5) Fy directed to load the concentric wheels, valid for carriage type RCS, RAS and RYS 6) For carriages type RYS the load is reduced by 50%; load equal to ZERO for carriages type RAS 7) Mx equal to ZERO on carriages type RAS and RYS 8) Mz valid for carriages type RCS, RAS and RYS CARRIAGE WITH 3, 4, 5 AND 6 WHEELS TYPE RT, RTL AND RTY Guide Carriage Cy 9) Sistema di riferimento NT 28 NT 43 C3 RT 28 88 C4 RT 28 115 A Edizione Foglio C4 RT 28 115 B 1 / 1 C5 RT 281 140 C6 RT 28 170 A C6 RT 28 170 B C3 RT 43 134 C4 RT 43 175 A C4 RT 43 175 B C5 RT 43 215 A C6 RT 43 258 A C6 RT 43 258 B A (N) 4960 3720 3720 7440 5580 5580 12080 9060 9060 18120 13590 13590 Cz 10) (N) 1240 1804 1804 2367 2705 2705 3295 4667 4667 6681 7001 7001 CMx 11) (Nm) 11 16 16 22 24 24 44 66 66 88 99 99 CMy 10) (Nm) 30 69 69 78 103 103 130 278 278 316 418 418 9) Cy directed to load the concentric wheels, valid for cursor type RT, RTL and RTY. 10) For carriages type RTY the load is reduced by 50%; load equal to ZERO for carriages type RTL 11) CMx equal to ZERO for carriage type RTL and RTY. 12) CMz valid for carriage type RT, RTL and RTY. CARRIAGE WITH 3 WHEELS TYPE RCS, RAS AND RTY Guide Carriage Cy 13) (N) Cz 14) (N) CMx 15) (Nm) CMy 14) (Nm) CMz 12) (Nm) Mzl 62 129 258 193 193 387 236 459 918 689 689 1377 CMz 16) (Nm) Mzl Mzr 62 258 129 193 387 193 236 918 459 689 1377 689 Mzr LS 63 C3 RCS 63 226 28400 6700 124 403 852 852 13) Cy directed to load the concentric wheels, valid for cursor type RCS, RAS and RYS 14) For carriages type RYS the load is reduced by 50%; load equal to ZERO for carriages type RAS 15) CMx equal to ZERO for carriage type RAS and RYS 16) CMz valid for carriage type RCS and RAS and RYS | 81
Page 1 and 2:
LINEAR GUIDE SYSTEMS THE SPECIALIST
Page 3 and 4:
SUMMARY PAGE 4 1.0 COMPANY 0 PAGE 8
Page 5 and 6:
PRODUCT OVERVIEW 1 PAGE 06 PAGE 07
Page 7 and 8:
1.2 ROLBLOC For medium-heavy loads
Page 9 and 10:
1.5 C-LINE For light-medium loads P
Page 11 and 12:
FLEXI-LINE 645 For light-medium loa
Page 13 and 14:
HEAVY-LINE 2 PAGE 14 PAGE 20 PAGE 2
Page 15 and 16:
2.1 GUIDE ROLLERS RKU Guide rollers
Page 17 and 18:
FLOATING GUIDE ROLLERS RKUL 2.1 Flo
Page 19 and 20:
GUIDE PINS SAG D h7 2.1 Guide pins
Page 21 and 22:
GUIDE GP ... M 2.2 Rail in steel, g
Page 23 and 24:
GUIDE WHEELS FK 2.2 Guide wheel wit
Page 25 and 26:
HEAVY-LINE - GP SYSTEM CAM FOLLOWER
Page 27 and 28:
2.2 Type Dimensions (mm) D e D i A
Page 29 and 30: GUIDE ROLLERS COMBINATIONS 2.3 LAYO
Page 31 and 32: 2.4 MARBLE MACHINERY Heavy-Line sys
Page 33 and 34: ROLBLOC 3 PAGE 34 PAGE 35 PAGE 40 P
Page 35 and 36: GUIDE RAILS GU ... M, GU ... MT 3.2
Page 37 and 38: 3.2 CARRIAGES BL ... DS WITH DISCHA
Page 39 and 40: WIPERS RPT 3.2 Material: Plastic (p
Page 41 and 42: MOUNTING EXAMPLE 3.4 Palletising eq
Page 43 and 44: V-LINE 4 PAGE 44 PAGE 62 PAGE 64 4.
Page 45 and 46: GUIDE FS ... M 4.1 Rail in steel wi
Page 47 and 48: GUIDE FSH ... M, FSX ... M 4.1 Rail
Page 49 and 50: NOTES | 49
Page 51 and 52: 4.1 GUIDE ROLLERS FR ... EU AS, FR
Page 53 and 54: GUIDE ROLLERS RKY ..., RKX ... 4.1
Page 55 and 56: FLOATING GUIDE ROLLERS FRL ... EU 4
Page 57 and 58: SPACERS FOR FS AND FSH 4.1 Ø L H
Page 59 and 60: 4.1 GUIDE FSHZ FSXZ LUBRICATION WHE
Page 61 and 62: 4.1 FOR FS GUIDE ROLLERS SIZE 52 AN
Page 63 and 64: 4.2 FSH / FSX lh FSH ... MT, FSX ..
Page 65 and 66: 4.3 Portable loader for steel sheet
Page 67 and 68: 5 MULTI-MOTION-LINE PAGE 68 PAGE 69
Page 69 and 70: CIRCULAR RAILS FSR ... M 5.2 Circul
Page 71 and 72: OVAL CIRCUIT FSRO 5.2 Oval circuit
Page 73 and 74: R 5.2 CARRIAGES WITH FIXED GUIDE RO
Page 75 and 76: 5.2 LUBRICATOR SYSTEM FOR CIRCULAR
Page 77 and 78: NOTES | 77
Page 79: C-LINE 6 PAGE 80 PAGE 84 6.1 PRODUC
Page 83 and 84: SCREW FOR RAILS WITH COUNTERSUNK HO
Page 85 and 86: s V GUIDE ROLLERS RT 6.2 Guide rol
Page 87 and 88: GUIDE ROLLERS RCS 6.2 Guide rollers
Page 89 and 90: CARRIAGE CONFIGURATION 6.2 The carr
Page 91 and 92: 6.2 CARRIAGES C4 RT, C4 RTL AND C4
Page 93 and 94: 6.2 CARRIAGES C6 RT, C6 RTL AND C6
Page 95 and 96: BASE-LINE 7 PAGE 96 PAGE 97 PAGE 10
Page 97 and 98: 7.2 BASE-LINE - DC-, C-SYSTEMS GUID
Page 99 and 100: 7.2 GUIDE ROLLERS PFV WITH “GOTHI
Page 101 and 102: NOTE | 101
Page 103 and 104: CARRIAGES T4 PFV 7.2 Carriages with
Page 105 and 106: LUBRICATOR LUBC 7.2 guide roller mo
Page 107 and 108: GUIDE FWH 7.3 Rail composed by an a
Page 109 and 110: 7.3 GUIDE ROLLERS FR ... EU AS, FR
Page 111 and 112: CARRIAGE T4 FR 7.3 Carriages with a
Page 113 and 114: MOUNTING EXAMPLES 7.5 Glue dispensi
Page 115 and 116: FLEXI-LINE 645 8 PAGE 116 PAGE 117
Page 117 and 118: dB t 8.2 FLEXI-LINE 645 - FWN SYSTE
Page 119 and 120: 8.3 FLEXI-LINE 645 MOUNTING EXAMPLE
Page 121 and 122: U-LINE 9 PAGE 122 PAGE 126 PAGE 134
Page 123 and 124: 9.1 CALCULATION EXAMPLE: FOUR CARRI
Page 125 and 126: LML SYSTEM 9.1 Aluminium guide rail
Page 127 and 128: GUIDE ROLLERS RCL, RCP, PFV 9.2 PFV
Page 129 and 130: Guide wheel with double row of ball
Page 131 and 132:
9.2 CARRIAGE C4 RCL, C4 RAL, C4 RYL
Page 133 and 134:
LUBRICATOR LUBM 9.2 H C G L S asse
Page 135 and 136:
CARRIAGE C3 RCL 16 NX 9.3 Carriages
Page 137 and 138:
NOTES | 137
Page 139 and 140:
10 TECHNICAL FEATURES PAGE 140 PAGE
Page 141 and 142:
10.1 ALUMINUM GUIDES GENERAL Made b
Page 143 and 144:
ASSEMBLY INSTRUCTIONS GUIDE ROLLERS
Page 145 and 146:
10.1 case of pure radial guide roll
Page 147 and 148:
10.1 Guide rail DC 18.65 is used wi
Page 149 and 150:
10.3 PRODUCT INDEX (IN ALPHABETIC O
Page 151 and 152:
10.3 PRODUCT DESCRIPTION PAGE T4 PF
Page 153 and 154:
NOTES | 153
Page 155 and 156:
NOTES | 155
show all

CAT-NADNL22EN - Linear Guide Systems

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?