Configuration Manual Synchronous Motors 1FK7 - Siemens ...

Gearboxes
Helical and angled gearboxes
5.2.2.2 Order codes required
Order No. geared motor
Order codes
1. Order code
Gearbox Type
1FK7 . . . – . . . . . – . . . . – Z
• Bevel gearbox B
Offset gear C
Helical gear D
Worm gearbox E
2. Order code
Type
Foot-mounted version 1 ) G 1
Tapped hole group G 2
Flange (circular) G 3
Foot-mounted and flange (circular) 1 ) G 5
Foot-mounted and tapped hole group 1 ) G 6
Gearbox shaft end
For helical gearboxes: For offset shaft gearboxes: For bevel and worm gearboxes:
Solid shaft with key Solid shaft with key, gearbox side 5 Solid shaft with key, gearbox side 4 1
Hollow shaft with keyway Hollow shaft with keyway, insertion gearbox side 4 3
Hollow shaft with tensioning element, Hollow shaft with tensioning element,
4
shrink disk, side 6,
shrink disk, side 4,
insertion gearbox side 5
insertion gearbox side 3
Solid shaft with key, gearbox side 3 5
Hollow shaft with keyway, insertion gearbox side 3 7
Hollow shaft with tensioning element,
shrink disk, side 3,
insertion gearbox side 4
8
3. Order code
Type of construction Mounting position
Helical gearbox: Offset shaft, bevel and worm gearboxes:
IM B 3 / IM B 5 / IM B 14 / IM B 34 / IM B 35 EL 1 H 1
– EL 2 H 2
IM B 8 EL 3 H 3
IM B 6 / IM B 7 EL 4 H 4
IM V 1 EL 5 H 5
IM V 3 / IM V 6 / IM V 19 EL 6 H 6
IM V 5 – H 7
IM V 18 – H 8
Connector mounting position
Connector position: Gearbox side 2, on top 1
Connector position: Gearbox side 4, on right 2
Connector position: Gearbox side 1, bottom 3
Connector position: Gearbox side 3, left 4
1) The mounting feet are always on gearbox side 1.
1FK7 Synchronous Motors
5-10 Configuration Manual (PFK7), 10/2005 Edition, 6SN1197-0AD06-0BP1