Configuration Manual Synchronous Motors 1FK7 - Siemens ...

More documents

Recommendations

Info

Gearbox Planetary gearbox 5.3.2.2 Benefits • High efficiency: > 97% single-stage > 94% 2-stage • Minimum torsional play:
5.3.2.3 Integration Gearbox Planetary gearbox The 1FK702� to 1FK710� motors are supplied ex factory (SIEMENS) complete with a planetary gearbox mounted through a flange. The gearboxes assigned to the individual motors and gear ratios i available for these motor/ gearbox combinations are listed in the selection table. When making a selection, the maximum permissible input speed of the gearbox must be observed (this is the same as the maximum motor speed). The motor/gearbox combinations listed in the selection tables are mainly intended for cyclic operation S3 - 60 % (ON time ≤ 60 % and ≤20 min). Reduced maximum motor speeds and output torques apply for use in S1 continuous duty (ON time > 60 % or >20 min). Gearbox temperatures may not exceed +90 °C, the maximum permissible input speed is limited from a time perspective. It must be ensured that the geared motors have adequate cooling through convection. The gearbox must be able to dissipate sufficient heat through its flange. Generally, planetary gearboxes can be used for ambient temperatures of between 0 ° and 40 °C. Temperatures down to -15 °C can be handled when special measures are applied (mechanical design measures, appropriate selection of lubricants etc.). 1FK7 synchronous motors to be implemented as follows for mounting to a gearbox: • with plain shaft end • Degree of protection IP65 • Anthracite paint finish 1FK7 Synchronous Motors Configuration Manual (PFK7), 10/2005 Edition, 6SN1197-0AD06-0BP1 5-37
Page 1:
��
Page 4 and 5:
Safety information/instructions Thi
Page 6 and 7:
Foreword Target group of the Config
Page 8 and 9:
Foreword Table -3: ESDS information
Page 10 and 11:
Foreword 1FK7 Synchronous Motors vi
Page 12 and 13:
Table of Contents 4.3 Holding brake
Page 14 and 15:
Motor Description Technical data Be
Page 16 and 17:
Motor Description Selection and ord
Page 18 and 19:
Motor Description Selection and ord
Page 20 and 21:
Motor Description Cooling, 1FK7 1.4
Page 22 and 23:
Motor Description Coupling output 1
Page 24 and 25:
Motor Description Armature short-ci
Page 26 and 27:
Motor Description Armature short-ci
Page 28 and 29:
Electrical Connections Rotating the
Page 30 and 31:
Technical Data and Characteristics
Page 32 and 33:
Page 34 and 35:
Page 36 and 37:
Page 38 and 39:
Page 40 and 41:
Page 42 and 43:
Page 44 and 45:
Page 46 and 47:
Page 48 and 49:
Page 50 and 51:
Page 52 and 53:
Page 54 and 55:
Page 56 and 57:
Page 58 and 59:
Page 60 and 61:
Page 62 and 63:
Page 64 and 65:
Page 66 and 67:
Page 68 and 69:
Page 70 and 71:
Page 72 and 73:
Page 74 and 75:
Page 76 and 77: Technical Data and Characteristics
Page 78 and 79: Motor Components (Options) Thermal
Page 80 and 81: Motor Components (Options) Encoders
Page 86 and 87: Motor Components (Options) Holding
Page 92 and 93: Gearboxes Selecting/dimensioning ge
Page 94 and 95: Gearboxes Selecting/dimensioning ge
Page 96 and 97: Gearboxes Helical and angled gearbo
Page 128 and 129: Gearbox Planetary gearbox 5.3.2.4 S
Page 132 and 133: Gearbox Planetary gearbox 5.3.3 LP+
Page 136 and 137: Dimension Drawings 1FK7 CT 6.1 1FK7
Page 138 and 139: Dimension Drawings 1FK7 CT Fig. 6-3
Page 144 and 145: Dimension Drawings 1FK7 HD 6.2 1FK7
Page 146 and 147: Dimension Drawings 1FK7 HD Fig. 6-1
Page 148 and 149: Dimension Drawings 1FK7 HD Fig. 6-1
Page 150 and 151: Dimension Drawings 1FK7 motors with
Page 158 and 159: Appendix References Manufacturer/Se
Page 160 and 161: Appendix References /APH7M/ Configu
Page 162 and 163: Index I-2 1FK7 Synchronous Motors C
Page 166: ��
show all

Configuration Manual Synchronous Motors 1FK7 - Siemens ...

Create successful ePaper yourself

Delete template?

Save as template?