Configuration Manual Synchronous Motors 1FK7 - Siemens ...

More documents

Recommendations

Info

Motor Description Coupling output 1.5.2 Assignment of the coupling outputs to the motors Table 1-7: Assignment of the coupling outputs to the motors Shaft height of the 1 FK7 motor d w [mm] 1) Rotex GS Type Torques that can be transmitted with 80 or 92 Sh–A–GS annular gear T R [Nm] 4) TKN [Nm] 2) TKmax [Nm] 3) 1FK7022–... 9 9 1.8 3.6 2.6 1FK703�–... 14 14 7.5 15 102 1FK704�–... 19 19/24 10 20 - 1FK706�–... 24 24/28 35 70 - 1FK708�–... 32 28/38 95 190 - 1FK710�–... 38 38/45 190 380 - 1) d w = Diameter, motor shaft end 2) T KN = Rated coupling torque 3) T Kmax = Maximum coupling torque 4) T R : = Frictional torque (torque that can be transmitted with a clamping hub at d w ) It may be necessary to use other annular gears (e.g. Shore hardness 80 Sh-A). They must be optimally harmonized with the mounted mechanical system. Warning The accelerating torque may not exceed the clamping torque of the coupling! Notice We cannot accept any liability for the quality and properties/features of third-party products. 1FK7 Synchronous Motors 1-10 Configuration Manual (PFK7), 10/2005 Edition, 6SN1197-0AD06-0BP1
1.5.3 Ordering data Address: KTR Kupplungstechnik GmbH Rodder Damm 170 D-48432 Rheine Postal address: Postfach 1763 D-48407 Rheine Tel. engineering Dept.: +49 (0) 5971 / 798 - 465 (337) Fax: +49 (0) 5971 / 798 - 450 Internet: www.ktr.com Motor Description Coupling output 1FK7 Synchronous Motors Configuration Manual (PFK7), 10/2005 Edition, 6SN1197-0AD06-0BP1 1-11
Page 1: ��
Page 4 and 5: Safety information/instructions Thi
Page 6 and 7: Foreword Target group of the Config
Page 8 and 9: Foreword Table -3: ESDS information
Page 10 and 11: Foreword 1FK7 Synchronous Motors vi
Page 12 and 13: Table of Contents 4.3 Holding brake
Page 14 and 15: Motor Description Technical data Be
Page 16 and 17: Motor Description Selection and ord
Page 18 and 19: Motor Description Selection and ord
Page 20 and 21: Motor Description Cooling, 1FK7 1.4
Page 24 and 25: Motor Description Armature short-ci
Page 26 and 27: Motor Description Armature short-ci
Page 28 and 29: Electrical Connections Rotating the
Page 30 and 31: Technical Data and Characteristics
Page 72 and 73:
Technical Data and Characteristics
Page 74 and 75:
Page 76 and 77:
Page 78 and 79:
Motor Components (Options) Thermal
Page 80 and 81:
Motor Components (Options) Encoders
Page 82 and 83:
Page 84 and 85:
Page 86 and 87:
Motor Components (Options) Holding
Page 88 and 89:
Page 90 and 91:
Page 92 and 93:
Gearboxes Selecting/dimensioning ge
Page 94 and 95:
Gearboxes Selecting/dimensioning ge
Page 96 and 97:
Gearboxes Helical and angled gearbo
Page 98 and 99:
Page 100 and 101:
Page 102 and 103:
Page 104 and 105:
Page 106 and 107:
Page 108 and 109:
Page 110 and 111:
Page 112 and 113:
Page 114 and 115:
Page 116 and 117:
Page 118 and 119:
Page 120 and 121:
Page 122 and 123:
Page 124 and 125:
Page 126 and 127:
Gearbox Planetary gearbox 5.3.2.2 B
Page 128 and 129:
Gearbox Planetary gearbox 5.3.2.4 S
Page 130 and 131:
Page 132 and 133:
Gearbox Planetary gearbox 5.3.3 LP+
Page 134 and 135:
Page 136 and 137:
Dimension Drawings 1FK7 CT 6.1 1FK7
Page 138 and 139:
Dimension Drawings 1FK7 CT Fig. 6-3
Page 140 and 141:
Page 142 and 143:
Page 144 and 145:
Dimension Drawings 1FK7 HD 6.2 1FK7
Page 146 and 147:
Dimension Drawings 1FK7 HD Fig. 6-1
Page 148 and 149:
Dimension Drawings 1FK7 HD Fig. 6-1
Page 150 and 151:
Dimension Drawings 1FK7 motors with
Page 152 and 153:
Page 154 and 155:
Page 156 and 157:
Page 158 and 159:
Appendix References Manufacturer/Se
Page 160 and 161:
Appendix References /APH7M/ Configu
Page 162 and 163:
Index I-2 1FK7 Synchronous Motors C
Page 166:
��
show all

Configuration Manual Synchronous Motors 1FK7 - Siemens ...

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?