Table of Contents Section Page - Peavey

General effects
Module name = Peavey VC/L-2
Description = The Peavey VC/L-2 is an all-tube, dual channel Valve Compressor/Limiter, featuring the exclusive
OptoDynamics system. With OptoDynamics, compression and limiting is much more natural and transparent
than with solid-state designs, as there are no solid-state opto-isolators, opto-couplers, or opto-diodes. The
“heart” of this design features an EL84 tube and two 12AX7s (four stages) for each channel. The output stage of
each channel is a “power amp” design that uses a two-stage 12AT7 tube, which results in a +20 dBm output
capability. Whether you need to produce smooth vocals, fix a lifeless snare drum, erase muddy lows from a
bass, or add “punch” to an acoustic guitar performance, the VC/L-2 OptoDynamics system provides complete
management over your audio dynamics.
Module name = 8Q
Description = An eight band parametric filter with adjustable frequency, gain and Q in seven types: high shelf,
low shelf, high pass, low pass, band pass, notch and peak. Each band can be either a first order or second order
IR filter. (Please note that first-order filters cannot represent EQ, band pass or notch curves.)
Module name = 3Q
Description = Triple parametric filters with adjustable frequency, gain and Q in seven types: high shelf, low
shelf, high pass, low pass, band pass, notch and peak. (Please note that first-order filters cannot represent EQ,
band pass or notch curves.)
Module name = ACS R1 Stereo Reverb
Description = Stereo reverb designed to be placed last in the chain to give ambience or width to the result,
with adjustable echo, pre-delay and room size. Three filters can be programmed to shape the char acter of the
wet signal.
36