6-Channel 10-Model Memory Full Range DSM2™ 2.4GHz Radio ...
6-Channel 10-Model Memory Full Range DSM2™ 2.4GHz Radio ...
6-Channel 10-Model Memory Full Range DSM2™ 2.4GHz Radio ...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
COPy/RESET SCREEN<br />
TO ACCESS ThE COPy fUNCTION<br />
Rotate the roller to highlight COPY then press the roller to enter the COPY function.<br />
COPy SCREEN<br />
SPEKTRUM DX6i • RADIO PROGRAMMING GUIDE<br />
Reduce photo to 13.5%<br />
COPY/RESET<br />
List<br />
MODEL 1 BLADE400<br />
COPY<br />
RESET<br />
Rotate the roller to COPY and select the model memory that you wish to copy by pressing the roller then<br />
rotating the roller.<br />
When the desired model memory is selected press and rotate the roller to highlight YES next to SURE and then<br />
press the roller to copy the model to the selected memory.<br />
Note: Be aware that the model you copy to will have its memory replaced with the new model’s<br />
memory, and the programming information for the model to be copied to will be erased.<br />
TO RETURN TO ThE MAIN SCREEN<br />
Press and hold the roller for more than 3 seconds then release the roller and the system will return<br />
to the main screen.<br />
TO RETURN TO ThE SETUP lIST<br />
Rotate the roller to highlight LIST in the upper right corner then pressing the roller will return the system<br />
to the SETUP LIST screen.<br />
TO PERfORM A RESET<br />
Press the ROLLER and hold while turning on the transmitter to enter the SETUP LIST. When SETUP LIST appears<br />
on screen release the roller.<br />
Reduce photo to 13.5%<br />
RESET<br />
MODEL 1 BLADE400<br />
SURE? NO/YES<br />
Alternatively the setup list can be accessed from the main screen by pressing the roller to access the ADJUST LIST,<br />
then scrolling through the ADJUST LIST by rolling the roller to highlight SETUP LIST, then pressing the roller.<br />
List<br />
<strong>10</strong>3
Change language