Concealed Hinges

Concealed Hinges
DUOMATIC - Opening angle 165º
Full overlay mounting with mounting plate
Cup dimensions
Minimum gap
Dimensions in mm
Inches are approximate
365
Drilling dimensions for cup attachment
Screw Mount
Drilling pattern 45/9.5
Dimensions and gap specifications in drawings and tables are calculated:
• With factory settings
• With mounting plate distance 0 mm
• For door offset with max. opening angle
Minimum
gap
Outer dimensions and distances
The door swings out laterally up to 5.5 mm when
opened. Distance with hinge with straight arm, mounting
plate height 0 mm and distance to cup 3 mm.
Hinges and Stays
• Material: Cup: zinc die-cast; Hinge arm: steel
• Colour: nickel-plated
• Cup attachment: screw mount, press fit, quickmount, tooless
• Mounting door to cabinet: slide on with DUOMATIC A mounting plates or clip on attachment
with DUOMATIC SM mounting plates
• Adjusting facility: Lateral adjusting continuously from -1.5 mm to +4.5 mm
Height adjustment from -2 mm to +2 mm
Depth adjustment
with DUOMATIC A mounting plates +2.8 mm
with DUOMATIC SM mounting plates from -0.5 mm to +2.8 mm
• With self closing spring
Press fit, Quickmount or Tooless
Drilling pattern 45/9.5
Door Distance to cup mm
thickness mm 3 4 5 6 7 8
16 0.0 0.0 0.0 0.0 0.0 0.0
18 0.0 0.0 0.0 0.0 0.0 0.0
20 0.0 0.0 0.0 0.0 0.0 0.0
22 0.7 0.1 0.1 0.1 0.1 0.1
24 2.7 1.8 1.2 0.9 0.7 1.6
26 4.6 3.8 3.0 2.5 2.0 1.7
28 7.9 6.9 5.9 4.9 3.9 3.2
Rounding off the edge of door reduces the given values.
Call 1-800-423-3531 from anywhere in Canada - www.hafele.com
Dimensional data not binding. We reserve the right to alter specifications without notice.