Concealed Hinges

Dimensional data not binding. We reserve the right to alter specifications without notice.
Concealed Hinges
Call 1-800-423-3531 from anywhere in Canada - www.hafele.com
Hinges and Stays
DUOMATIC for corner cabinets - Opening angle of first door 70º, for door thicknesses up to 23 mm
Full overlay mounting with mounting plate
Cup dimensions
Installation reference
• Material: Hinge arm: zinc alloy
Cup: steel
• Colour: nickel-plated
• Cup mounting: screw mount, press fit, quickmount, tooless
• Mounting door to cabinet: slide on with DUOMATIC A mounting plates or clip on attachment
with DUOMATIC SM mounting plates
• Adjusting facility: Lateral adjusting continuously from -1.5 mm to +4.5 mm
Height adjustment from -2 mm to +2 mm
Depth adjustment
with DUOMATIC A mounting plates +2.8 mm
with DUOMATIC SM mounting plates from -0.5 mm to +2.8 mm
• With self closing spring
Drilling dimensions
for cup attachment
Screw Mounting
Drilling pattern 45/9.5
TAB = 3-6
Press fit, Quikmount or Tooless
Drilling pattern 45/9.5
Calculations of drilling distance for mounting plates:
Examples for doors with sharp edges
Door thickness mm Drilling distance wing mounting plate mm
Determination of drilling distance with wing mounting plates:
Drilling distance (X) = 31 - door thickness + 32
20 27
16 31
19 28
18 29
Door thickness mm Drilling distance wing mounting plate mm
Determination of drilling distance with wing mounting plates:
Drilling distance (X) = 31 - door thickness + 32
20 43
16 47
19 44
18 45
Door thickness mm Distance to cup mm Mounting plate distance mm
Determination of mounting plate height:
Mounting plate height (H) = 26 - door thickness - tab
20 5 1
16 6 4
19 3 3
18
Note
4 5* (26-18-4+1 adjustment)
* Mounting plate heights that are not available can be
achieved by using mounting plates with smaller mounting
plate height plus lateral adjustment.
Dimensions in mm
Inches are approximate
372