Concealed Hinges

Dimensional data not binding. We reserve the right to alter specifications without notice.
Concealed Hinges
DUOMATIC with PUSH system for opening without handle - Opening angle 110º die-cast
Cup dimensions
Minimum gap
Minimum
gap
Door Distance to cup mm
thickness mm 3 4 5 6
16 0.5 0.5 0.5 0.5
17 0.7 0.7 0.7 0.7
18 0.9 0.9 0.9 0.9
19 1.2 1.2 1.2 1.2
20 1.5 1.5 1.5 1.5
21 1.8 1.8 1.8 1.8
22 2.4 2.1 2.1 2.1
23 3.7 2.7 2.6 2.5
24 5.1 4.1 3.1 3.0
25 6.5 5.5 4.1 3.5
26 7.8 6.8 5.4 4.4
Call 1-800-423-3531 from anywhere in Canada - www.hafele.com
Hinges and Stays
• Material: Cup: zinc die-cast; Hinge arm: steel
• Colour: nickel-plated
• Cup mounting: screw mount, press fit
• Mounting door to cabinet: slide on with DUOMATIC A mounting plates or clip on attachment
with DUOMATIC SM mounting plates
• Adjusting facility: Lateral adjusting continuously from -1.5 mm to +4.5 mm
Height adjustment from -2 mm to +2 mm
Depth adjustment
with DUOMATIC A mounting plates +2.8 mm
with DUOMATIC SM mounting plates from -0.5 mm to +2.8 mm
Drilling dimensions for cup
attachment
Screw Mounting Press fit
Drilling pattern 45/9.5
Dimensions and gap specifications in drawings and tables
are calculated:
• With factory settings
• With mounting plate distance 0 mm
• For door offset with maximum opening angle
Minimum distance
between door and
side panel
Minimum
distance
Drilling pattern 45/9.5
Door Distance to cup mm
thickness mm 3 4 5 6
16 0.0 0.0 1.1 2.0
17 0.0 0.0 1.3 2.3
18 0.0 0.3 1.6 2.5
19 0.0 0.6 1.8 2.8
20 0.2 0.9 2.1 3.1
21 0.5 1.2 2.3 3.3
22 0.8 1.4 2.6 3.6
23 1.1 1.7 2.9 3.8
24 1.4 2.0 3.1 4.1
25 1.7 2.3 3.4 4.3
26 1.9 2.6 3.6 4.6
Rounding off the edge of door reduces the given values
Dimensions in mm
Inches are approximate
388