Concealed Hinges

Dimensional data not binding. We reserve the right to alter specifications without notice.
Concealed Hinges
3203 Snap-on Hinges – Negative 45º – Grass
45° corner hinge with snap-on feature
• Door thickness: 16 to 19 mm
• Side panel thickness from 16 mm
• Three-way adjustment
• Self-closing
Trim caps, for hinge arm
Opening angle:
48
78.5
Gap F
Door overlay
44.5
Raised flat head wood screws pages 309–310
2
93
42
Depth 12.7
42
Depth 12.7
4.3
1.3
25.2
22.2
8
11
11
3-5
35
Tab
35
Screw-mount, 42/11
Material: Cup: zinc die-cast
Hinge arm: steel
Hinge arm
With -45° angle
Packing: 50 pcs.
Press-fit, 42/11
Material: Cup: zinc die-cast
Hinge arm: steel
Hinge arm
With -45° angle
Packing: 50 pcs.
Example of inset mounting
Material: plastic
Mounting Hinge arm
Side panel
mounting
for -45° angle
Call 1-800-423-3531 from anywhere in Canada - www.hafele.com
Hinges and Stays
Minimum gap F:
the required minimum gap depends on the given
door thickness and cup spacing (Tab).
Door thickness in mm
Tab in mm 3.0
up to 5.0
16
0.7
0.6
17
0.9
0.8
18
1.1
1.0
19
2.3
1.3
20
4.0
2.0
Example of overlay
Tab in mm 3.0
Door overlay (in mm)
1.5
3.5
2.0
4.0
2.5
4.5
3.0
5.0
3.5
The gap depends on the design of the furniture.
nickel-plated
348.68.650
nickel-plated
348.68.660
21
5.7
3.7
Flat Head
#6
22
7.5
5.5
The above dimensions (or greater) should be used for
gap F. The values in the above table are based on a
door corner radius of 1 mm.
nickel-coloured matt
348.79.706
Packing: 50 pcs. (Can be printed with company logo.
Minimum order of 5,000 pcs.)
Dimensions in mm
Inches are approximate
418