Concealed Hinges
Concealed Hinges
Concealed Hinges
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Dimensional data not binding. We reserve the right to alter specifications without notice.<br />
<strong>Concealed</strong> <strong>Hinges</strong><br />
300 - Grass<br />
Which hinge type?<br />
Sample<br />
• Opening angle 110°<br />
• Side panel thickness: 19 mm<br />
• Door thickness: 19 mm<br />
• Tab spacing e.g. 4 mm (variable)<br />
• Gap e.g. 5 mm (variable)<br />
The minimum gap is determined by the door<br />
thickness and the cup spacing.<br />
Answer - here 1.8 mm - can be found in<br />
the table on each hinge page.<br />
Example: minimum gap table of 110° hinge<br />
Minimum gap F: The required minimum gap depends on the given door thickness and cup spacing (Tab).<br />
Door thickness in mm 16 17 18 19 20 21<br />
Tab in mm 3.0 1.1 1.3 1.6 1.9 3.6 5.4<br />
3.5 1.1 1.3 1.6 1.9 3.1 4.9<br />
4.0 1.1 1.3 1.6 1.8 2.6 4.4<br />
4.5 1.0 1.3 1.5 1.8 2.1 3.9<br />
The above dimensions (or greater as for example 5 mm) should be used for gap F.<br />
Sample Calculations<br />
How many hinges per door?<br />
Hinge Type 14<br />
Side panel mounting<br />
for overlay doors<br />
Tab<br />
Door<br />
Hinge Type 6<br />
Center panel/twin mounting<br />
overlay doors<br />
Center<br />
panel<br />
Door Door<br />
There is no general answer to the question of how many hinges to use per door.<br />
The deciding factors here are the dimensions of the doors and the resulting<br />
weight. In case of doubt (for doors with mirrors or exceptionally wide doors) a<br />
trial mounting is recommended. Avoid doors which are wider than they are tall.<br />
For normal doors made of conventional materials, the adjacent table can be<br />
used to aid your decision. If in doubt, allow for an extra hinge.<br />
Tab<br />
Door<br />
width<br />
(mm)<br />
Call 1-800-423-3531 from anywhere in Canada - www.hafele.com<br />
2500<br />
2000<br />
1500<br />
1000<br />
500<br />
Door height<br />
in mm<br />
22<br />
7.1<br />
6.6<br />
6.1<br />
5.6<br />
Hinge Type -2<br />
Side panel mounting<br />
for inset doors<br />
(A) Full Overlay (C) Inset<br />
(B) Half Overlay or<br />
Twin Mounting<br />
16 mm (5/8") Hinge Mounting Tab Total<br />
Material Type Plate Overlay<br />
Full overlay (A) 14 - 4 + 5 = 15<br />
Half overlay (B) 6 - 4 + 5 = 7<br />
Inset (C) -2 - 1 + 3 = 0<br />
If there is no mounting plate with the required reinforcement, then the tab or gap must be altered.<br />
Side<br />
Tab<br />
Weight approx. (in kg.)<br />
4 - 5 6 - 9 10 - 15 16 - 22<br />
500 500 500 500<br />
<strong>Hinges</strong> and Stays<br />
2 3 4 5<br />
No. of hinges<br />
Door<br />
19 mm (3/4") Hinge Mounting Tab Total<br />
Material Type Plate Overlay<br />
Full overlay (A) 14 - 1 + 4 = 17<br />
Half overlay (B) 6 - 1 + 4 = 9<br />
Inset (C) -2 - 1 + 3 = 0<br />
Dimensions in mm<br />
Inches are approximate<br />
396
Change language