MS9500 Voyager Series - Metrologic-Shop.de
MS9500 Voyager Series - Metrologic-Shop.de
MS9500 Voyager Series - Metrologic-Shop.de
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
THE POWERLINK CABLE<br />
DISCONNECTING THE POWERLINK CABLE<br />
Before removing the cable from the scanner, <strong>Metrologic</strong> recommends that the<br />
power on the host system is off and the power supply has been disconnected<br />
from the PowerLink cable.<br />
Figure 8.<br />
1. Locate the small ‘pin-hole’ on the top of the unit near the bottom of the<br />
<strong>Voyager</strong> logo.<br />
2. Bend an ordinary paperclip into the shape shown above.<br />
3. Insert the paperclip (or other small metallic pin) into the small ‘pin-hole’.<br />
4. You will here a faint ‘click’. Pull gently on the strain-relief of the PowerLink<br />
cable and it will sli<strong>de</strong> out of the scanner.<br />
CONNECTING THE POWERLINK CABLE<br />
Important: If the PowerLink cable is not fully latched the unit can power<br />
intermittently.<br />
Figure 9a. Figure 9b.<br />
9
Change language