MS9500 Voyager Series - Metrologic-Shop.de

More documents

Recommendations

Info

DESIGN SPECIFICATIONS 32 OPERATIONAL Light Source Visible Laser Diode 650 nm ± 10 nm Laser Power: Less than 1 mW (peak) Depth of Scan Field: 0 mm - 203 mm (0” - 8”) for 0.330 mm (13 mil) bar code @ default setting Scan Speed: 72 scan lines per second Scan Pattern: Single scan line Minimum Bar Width: 0.127 mm (5.0 mil) Infrared Activation: Decode Capability System Interfaces Long Range: 0 mm – 279 mm ± 51 mm (0” – 11” ± 2”) Short Range: 0 mm – 102 mm ± 25 mm (0” – 4” ± 1”) Autodiscriminates all standard bar codes for others call a Metrologic service representative RS232, PC Keyboard Wedge, Stand-Alone Keyboard, OCIA, IBM 468X/469X, Light Pen Emulation, Laser Emulation, RS232 with DSR, Low Speed USB POS or HID, Full Speed USB Print Contrast: 35% minimum reflectance difference Number Characters Read: Roll, Pitch, Yaw: 42°, 68°, 52° Beeper Operation: 7 tones or no beep Indicators (LED) Default Settings MECHANICAL Up to 80 data characters (Maximum number will vary based on symbology & density) Green = laser on, ready to scan Red = good read Yellow (MS9540 Only) = ON, CodeGate button is inactive OFF, CodeGate button is active Length: 198 mm (7.8”) Width: Handle - 45 mm (1.8”), Head - 78 mm (3.1”) Depth: 40 mm (1.6”) Weight: 149 g (5.25 oz) Specifications subject to change without notice.
DESIGN SPECIFICATIONS ELECTRICAL Input Voltage: 5VDC ± 0.25V Power: Operating = 0.825 W, Standby = 0.600 W Current: Operating = 165 mA @ 5VDC, Standby = 120 mA @ 5VDC DC Transformers: Class 2; 5.2V @ 650 mA Laser Class: CDRH: Class II; EN60825-1:1994/A11:1996 Class 1 ENVIRONMENTAL Temperature: EMC: FCC Class B Operating = 0°C to 40° (32° to 104°F) Storage = -40°C to 60°C (-40°F to 140°F) Humidity: 5% to 95% relative humidity, non-condensing Light Levels: Up to 4842 Lux (450 footcandles) Shock: Designed to withstand 1.5 m (5’) drops Contaminants: Sealed to resist airborne particulate contaminants Ventilation: None required Specifications subject to change without notice. 33
Page 1: METROLOGIC INSTRUMENTS, INC. MS9500
Page 4 and 5: TABLE OF CONTENTS Introduction.....
Page 7 and 8: INTRODUCTION The Voyager ® MS9500
Page 9 and 10: SCANNER AND ACCESSORIES OPTIONAL AC
Page 11 and 12: INSTALLING THE SCANNER TO THE HOST
Page 13 and 14: INSTALLING THE SCANNER TO THE HOST
Page 15 and 16: THE POWERLINK CABLE DISCONNECTING T
Page 17 and 18: STAND KITS Free Standing Kits #46-4
Page 19 and 20: ASSEMBLING THE STAND Stand Option 2
Page 21 and 22: SCANNER PARTS Red LED Green LED Out
Page 23 and 24: VISUAL INDICATORS The MS9540 has th
Page 25 and 26: PROGRAMMING MODES The MS9500 Voyage
Page 27 and 28: PROGRAMMING MODES EXAMPLE #3: The f
Page 29 and 30: LABELS Each scanner has a label on
Page 31 and 32: IR ACTIVATION Figure 32. 25
Page 33 and 34: TROUBLESHOOTING GUIDE The following
Page 35 and 36: TROUBLESHOOTING GUIDE Symptoms Poss
Page 37: RS-232 DEMONSTRATION PROGRAM If an
Page 41 and 42: DEFAULT SETTINGS PARAMETER DEFAULT
Page 43 and 44: DEFAULT SETTINGS PARAMETER DEFAULT
Page 45 and 46: SCANNER AND CABLE TERMINATIONS Scan
Page 47 and 48: SCANNER AND CABLE TERMINATIONS Cabl
Page 49 and 50: LIMITED WARRANTY The MS9500 series
Page 51 and 52: PATENTS “Patent Information This
Page 53 and 54: INDEX M Maintenance................
Page 56: October 2003 Printed in the USA 00-

MS9500 Voyager Series - Metrologic-Shop.de

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?